Workplace offers more storage options than any industrial furniture supplier.  They are also an ideal solution for standalone instrumentation workstations.

Available in 9 standard sizes, Workplace Storage Units are available in an open configuration, with sliding metal doors, or hinged metal doors and come fully assembled.

Optional adjustable shelving is available for all models. A full width pull-out tray may be added to open or hinged door configurations. Units may be specified with accessories as well as motorized height adjustability.

Open Configuration Units

Ideal for applications where easy access to supplies and equipment is necessary.  Add optional interior shelving or pull out tray.

Detailed configuration specifications are in the accordion section below.

Sliding Door Units

Use where space is tight and enclosed storage is a must. Doors  glide on roller guides for easy access to contents. Optional locks add security.

Detailed configuration specifications are in the accordion section below.

Hinged Door Units

Hinged metal doors keep contents hidden from view but open 90 degrees for full visibility of interior. Add optional locks, interior shelving or pull out tray.

Detailed configuration specifications are in the accordion section below.

Open Configuration: Stationary

To Order, Please Specify Model No. + Color Code + Worksurface Code + Accessories

Other Options:

STANDARD SIZES: STATIONARY 
Model No.DepthLengthAdjustable Height
6600-2448S1-ND24”48”35″ – 42″
6600-2460S1-ND24”60”35″ – 42″
6600-2472S1-ND24”72”35″ – 42″
6600-3048S1-ND30”48”35″ – 42″
6600-3060S1-ND30”60”35″ – 42″
6600-3072S1-ND30”72”35″ – 42″
6600-3648S1-ND36”48”35″ – 42″
6600-3660S1-ND36”60”35″ – 42″
6600-3672S1-ND36”72”35″ – 42″
  • Base unit ships assembled

Open Configuration: Mobile

To Order, Please Specify Model No. + Color Code + Worksurface Code + Accessories

Other Options:

STANDARD SIZES: MOBILE
Model No.DepthLengthFixed Height
6600-2448M1-ND24”48”36″
6600-2460M1-ND24”60”36″
6600-2472M1-ND24”72”36″
6600-3048M1-ND30”48”36″
6600-3060M1-ND30”60”36″
6600-3072M1-ND30”72”36″
6600-3648M1-ND36”48”36″
6600-3660M1-ND36”60”36″
6600-3672M1-ND36”72”36″
  • Interior space in mobile unit is reduced by 6″
  • Base unit ships assembled.

Sliding Door Configuration: Stationary

To Order, Please Specify Model No. + Color Code + Worksurface Code + Accessories

 

Other Options:

STANDARD SIZES: STATIONARY 
Model No.DepthLengthAdjustable Height
6600-2448S1-SD24”48”35″ – 42″
6600-2460S1-SD24”60”35″ – 42″
6600-2472S1-SD24”72”35″ – 42″
6600-3048S1-SD30”48”35″ – 42″
6600-3060S1-SD30”60”35″ – 42″
6600-3072S1-SD30”72”35″ – 42″
6600-3648S1-SD36”48”35″ – 42″
6600-3660S1-SD36”60”35″ – 42″
6600-3672S1-SD36”72”35″ – 42″

Base unit ships assembled

Sliding Door Configuration: Mobile

To Order, Please Specify Model No. + Color Code + Worksurface Code + Accessories

Other Options:

  • ADDITIONAL SIZES AVAILABLE: Contact Your Design Specialist
  • Caster options
  • STANDARD SIZES: MOBILE
    Model No.DepthLengthFixed Height
    6600-2448M1-SD24”48”36″
    6600-2460M1-SD24”60”36″
    6600-2472M1-SD24”72”36″
    6600-3048M1-SD30”48”36″
    6600-3060M1-SD30”60”36″
    6600-3072M1-SD30”72”36″
    6600-3648M1-SD36”48”36″
    6600-3660M1-SD36”60”36″
    6600-3672M1-SD36”72”36″
  • Interior space in mobile unit is reduced by 6″
  • Base unit ships assembled.

Hinged Door Configuration: Stationary

To Order, Please Specify Model No. + Color Code + Worksurface Code + Accessories

Other Options:

STANDARD SIZES: STATIONARY 
Model No.DepthLengthAdjustable Height
6600-2448S1-HD24”48”35″ – 42″
6600-2460S1-HD24”60”35″ – 42″
6600-2472S1-HD24”72”35″ – 42″
6600-3048S1-HD30”48”35″ – 42″
6600-3060S1-HD30”60”35″ – 42″
6600-3072S1-HD30”72”35″ – 42″
6600-3648S1-HD36”48”35″ – 42″
6600-3660S1-HD36”60”35″ – 42″
6600-3672S1-HD36”72”35″ – 42″

 

  • Base unit ships assembled

Hinged Door Configuration: Mobile

To Order, Please Specify Model No. + Color Code + Worksurface Code + Accessories

Other Options:

STANDARD SIZES: MOBILE
Model No.DepthLengthFixed Height
6600-2448M1-HD24”48”36″
6600-2460M1-HD24”60”36″
6600-2472M1-HD24”72”36″
6600-3048M1-HD30”48”36″
6600-3060M1-HD30”60”36″
6600-3072M1-HD30”72”36″
6600-3648M1-HD36”48”36″
6600-3660M1-HD36”60”36″
6600-3672M1-HD36”72”36″

 

  • Interior space in mobile unit is reduced by 6″
  • Base unit ships assembled.

6600EX

  • Full-perimeter, all-metal framework provides exceptional stability and support of selected worksurface.
  • Built-in drawer brackets allow quick and simple installation of storage drawer(s) at any time.
  • Manual adjustable workheight provides range of 36″ up to 43″H.
  • Optional interior shelving is adjustable in 1-1/2″ increments.
  • Sliding doors glide on trackless roller guides, eliminating dust and debris collection typically found on track-mounted doors.

Laminate

PLASTIC LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

1-1/16 inch thick plastic laminate workstation topThe 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.

To specify a standard color Plastic Laminate Top, please use the following codes:

ne

ColorPost-Formed Front
Edge Order Code
Standard Edge
Order Code
Neutral Glace color detailNeutral GlacePL-01PFPL-01SQ
Gray Glace color detailGrey GlacePL-02PFPL-02SQ
Frosty WhiteFrosty WhitePL-03PFPL-03SQ
BlackBlackPL-04PFPL-04SQ
Fashion GreyFashion GreyPL-05PFPL-05SQ
Non-standard colorNon-Standard Color*PL-00PFPL-00SQ

*Most Wilsonart International plastic laminate colors are available. Please call 1-800-258-9700 for assistance.


ESD LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

ESD laminate workstation topThe ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.

Note: ESD Tops require connection to your earth ground system.

To specify an ESD Laminate Top, please use the following codes:

 

ColorPost-Formed Front
Edge Order Code
Standard Edge
Order Code
White metalWhiteES-03PFES-03SQ
Non-standard colorNon-Standard Color*ES-00PFES-00SQ

*Additional ESD laminate colors are available. Please call 1-800-258-9700 for assistance.


CHEMICAL RESISTANT LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.

To specify a Chemical Resistant Laminate Top, please use the following codes:

ColorPost-Formed Front
Edge Order Code
Standard Edge
Order Code
BlackBlackCR-04PFCR-04SQ
Non-standard colorNon-Standard Color*CR-00PFCR-00SQ

*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.

Resin

EPOXY RESIN TOPS

Epoxy resin workstation topEpoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.

Note: Silicone adhesive is supplied to mount Top.

To specify an Epoxy Resin Top, please use the following code:

ColorOrder Code
BlackBlackER-01

 

*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.


PHENOLIC RESIN TOPS

Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.

Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.

Note: Silicone adhesive is supplied to mount Top.

To specify a Phenolic Resin Top, please use the following code:

ColorOrder Code
BlackBlackPR-01

*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Wood

MAPLE TOPS

1-3/4 inch thick maple workstation topThe 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.

The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.

Note: Please state if end use is to be for food service or preparation.

To specify a Maple Top, please use the following code:

ColorOrder Code
Maple wood detailMapleMP-01

Steel

STAINLESS STEEL TOPS

Stainless steel workstation topThe Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core.  The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core.  With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.

The standard stainless material is type No. 304 polished finish*.

To specify a Stainless Steel Top, please use the following code:

ColorOrder Code
Stainless steel detailStainless Type 304SS-01

 

*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.


COLD-ROLLED STEEL TOPS

Cold-rolled steel workstation topThe Cold-Rolled Steel Tops are designed as an inverted pan top.  They are backed with a 1-1/8″ fiberboard.  The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.

The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.

To specify a Cold-Rolled Steel Top, please use the following code:

ColorOrder Code
Rolled steel detailSame as workstationCS-01

Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.

STANDARD COLORS

White metalWHITE | Color Code: 0006
Oyster grey metalOYSTER | Color Code: 0150
Silver grey (semi-metallic)SILVER GRAY (Semi-Metallic) | Color Code: 0002
Tan metalTAN | Color Code: 0001
Chateau Blue metalCHATEAU BLUE| Color Code: 0015
Mercury Blue metalMERCURY BLUE | Color Code: 0100
Navy Blue metalNAVY BLUE | Color Code: 0900
Burgundy metalBURGUNDY | Color Code: 0950
Black wrinkle (textured finish)BLACK WRINKLE (Textured Finish) | Color Code: 0400
Black metal (semi-gloss)BLACK (Semi-Gloss) | Color Code: 0018

 

ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.

COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.

IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.

ship

Quick Ship

Quick-Ship does not mean “what we have on hand.” You still get all the advantages of Workplace configured to order workstations. Only faster.

More Info

Contact icon

Call Us

Contact a Workplace Modular Systems Design Specialist for friendly assistance with workstation configuration, information, quotes, and support.

Connect

Mobile

Going Mobile

Need extra workspace? Simply move the workstation to wherever you need it, whenever you need it.

Our Mobile Models