Shelving
There’s a Place for Everything
Workplace features a wide range of shelving options to make your workstation more functionable.
Adjustable Over Table Shelving
Standard Overtable Shelving
- Standard Shelving height 2″ and adjusts in 1-1/2″ increments.
- 125 Lb. weight capacity.
- Available in 12″, 15″ or 18″ depths and fits table lengths between 24″L and 96″L (half lengths require a center mount upright).
- Standard shelving may be specificed with electrical outlets (consult with a Design Specialist)
Note: Standard shelving may be used as an Undertable Shelf. Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.
Low Profile Shelving
- Height 1.25″ and adjusts in 3″ increments.
- 75 Lb weight capacity.
- Available in 12″, 15″ or 18″ depths and fit table lengths between 24″ and 96″L.
Sloped Shelving
- Shelf may be set at a 20° slope with shelf brackets.
- Front stop is required and is available in a variety of sizes (consult a Design Specialist).
- Sloped shelving mounts to Solid Uprights.
Back & End Stops
- All-metal backstop and tapered end stops offer all-around protection for adjustable shelves, panel risers, and worksurfaces.
- Height is 5″ before mounting. Deduct thickness of shelf or worksurface to determine overall height.
- Available in standard or large sizes.
- Front stops used for tilted or cantilever shelving are available.
- Consult a design specialist for further information and to determine correct bracket and mounting hardware.
Solid Divider Shelving
- Metal shelf with easy to move all-metal snap-in dividers that may be spaced at desired locations in 1-1/2″ increments.
- Top front of dividers and supplied end stops feature radius corners for appearance and safety.
- 125 Lb. capacity.
- Shelf available in 12″ depth.
- Fits table lengths between 24″ and 96″L.
Wire Divider Shelving
- Perforated metal shelves feature divider spacing in approximately 3″ increments.
- Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
- 125 Lb. capacity.
- Shelf available in 12″ or 18″ depth.
- Shelf may be set at a 20° slope on brackets and requires a front stop.
- Fits table lengths between 24″ and 96″L.
Note: Wire divider shelving may be used as an Undertable Shelf. Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.
Cantilever Shelving
- 22″ deep shelf of all-metal construction; flanged 2″ on all sides.
- Shelf mounts between Solid Uprights and extends 10″ beyond back and front of uprights.
- May be positioned for use as a flat surface, or at an angle up to 20 degrees at either front or back.
- Front/Rear Stop with 2″ lip is included.
Non-Metal Work Surface Shelving
- Attractive, easy to clean surface mounts to Solid Uprights with wide flange shelf brackets.
- Shelves adjust in 1.5″ increments on Solid Uprights.
- Available in 12″ or 18″ depth.
- Fits table lengths between 24″ and 96″L.
- 75 Lb. weight capacity.
- Shelf material available in: Phenolic Resin, Plastic Laminate, and Maple Butcherblock.
Dual-Sided Shelving
- Adjustable shelving is accessible from both sides of back-to-back or island units.
- Shelves available in powder-coated steel, plastic laminate, ESD, or phenolic resin materials.
- Shelves are 1” thick and adjust in 3” increments; 125 lb. weight capacity per shelf.
- Structural Uprights are available in 12″ or 18″ depth x 36″, 48″, or 60″ height. Fits table lengths between 24″ and 96″ (additional center support is recommended on units exceeding 80″).
- Electric power, air, articulating arms, lighting, and back/end stops may be added. Contact a Design Specialist for more information.
Wire Shelving
- Metro Chrome industrial wire shelving minimizes dust accumulation and allows free circuation of air, as well as greater visibility of object on shelf.
- Mounts to Solid Uprights with shelf brackets.
- 75 Lb. weight capacity.
- Available in 48″, 60″ and 72″ lengths.
Fixed-Height Shelving
Structural Riser
- The Structural Riser is constructed of right and left side open risers in a tubular and formed channel design; connected with a swaybrace and 1” metal shelf. The open structure allows access from all sides.
- Shelves available in powder-coated steel, plastic laminate, ESD or phenolic resin materials.
- Back & end stops, air-trough, power and lighting may be added.
- 200 Lb. weight capacity.
- Structural Riser uprights are available in 12” or 18” depth x 12”, 18” or 24” height. Fits table lengths between 24” to 96”.
Panel Riser Shelving
- Equipped with enclosed inner panels to create a more finished appearance. An optional rear panel is available.
- 20-amp duplex outlets may be specified in front shelf and riser.
- 125 Lb. weight capacity.
- Available in 12” and 18” depths x 12”, 18”, or 24” heights.
- Clearance beneath shelf is 2” less than overall height of assembly.
- Back and end stops, powerstrip and lighting may be added.
*Special sizes available upon request. Full rear safety/privacy shelf also available.
Under Table Shelving
Standard Under Table Shelving
- Metal shelf mounts on leg crossbars with supplied brackets.
- Shelves available in 12″ and 18″ depths.
- Fits table lengths between 24″ and 96″.
- Optional Back & End or Front Stops may be specified.
Full-Depth Under Table Shelving
- Maximize storage with a shelf that is the same depth as leg-to-leg measurement.
- Reinforced metal shelf mounts to the table leg’s structural frame.
- Available in 24″, 30″ and 36″ depths.
- Fits table lengths between 24″ and 96″.
Extended Depth Under Table Shelving
- Metal shelf mounts on leg crossbars with supplied brackets.
- Shelf depth is determined by leg-to-leg distance:
- Approx. 19″ depth on 24″ table
- Approx. 25″ depth on 30″ table
- Approx. 31″ depth on 36″ table
- Fits table lengths between 24″ and 96″.
- Optional Back & End or Front Stops may be specified.
Pull-Out Tray: Leg Mounted
- Allows easier reach and access to stored equipment, parts, or peripherals.
- Heavy-gauge metal construction with integrated tray pull.
- Load capacity 200 lbs. evenly dispersed.
- Available for 24”, 30” and 36” table depths x 36″, 48″, 60″, or 72″ lengths.
- Note: Leg sections with provisions to attach shelf are required for mounting.
- Compatible with Standard Workstation only.
Mobile Tray Shelf
- Provides greater workstation flexibility.
- Easy access to equipment and peripherals.
- Welded, heavy-gauge metal, 500 lb. load capacity.
- 2 chrome pull handles are included, but optional to attach.
- Available for standard bench lengths between 36” and 96”
and depths of 24”, 30”, or 36”. - Accepts all standard Workplace Casters. Tray lengths 72” and greater require 6 Casters.
Wire Divider Under Table Shelving
- An efficient, practical way to keep larger items organized. Perfect for storage of shipping cartons and materials.
- Metal shelf mounts on leg crossbars with supplied brackets.
- Perforated shelves feature divider spacing in 3″ increments; threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
- Available in 12″ and 18″ depths; fits table lengths between 24″ and 96″L.
Workplace Experience
Learn more about the Workplace experience. Our hands-on approach ensures you have the perfect product to fit your needs.
Consult
Design
Execute
Review
Deliver