Leg Options

Back

Mobile or Stationary Leg Components

Choose what type of leg styling you need to build your workstation from the ground up.

Casters

Levelers

Mobile Retrofit

Make Your Workstation Mobile

Get a Quote!

5" Standard Total-Lock Caster

Comes standard on all mobile workstations unless specified.
Fully lockable caster.
Weight Capacity: 250 lbs per caster.
P/N 2012-01

5" Heavy Duty Total-Lock Caster

Extra wide wheel design.
Fully lockable caster.
Weight capacity: 500 lbs per caster.
P/N 2000-01

3" Standard Caster

3″ diameter side lock caster.
Lowers worksurface by 2″ compared to standard 5″ caster.
Weight capacity: 400 lbs per caster.
P/N 2003-3

Low Clearance Leveling Caster with Plate

Hand or tool-adjustable leveling.
Provides low profile clearance (approximately 1/2″) when caster is retracted.
Lowers worksurface by 2″ compared to standard 5″ caster.
Working load rating: 1100 lbs per caster.
P/N 2012-08

High Clearance Leveling Caster

3” Diameter tool-adjustment locking caster.
Provides higher clearance when caster is retracted (approx 1-1/2”).
Lowers worksurface by 2” compared to standard 5” caster.
Requires specialized leg insert to accommodate leveling stem.
P/N 2012-05

Swivel Caster with Threaded Stem

Standard option to configure a Mobile Direct Drive Workstation.
Casters will engage when workstation is fully lowered.
3”H x 1.25”W Swivel with threaded stem.
P/N 2004-02
ESD Type: P/N 2004-03

5" ESD Caster

Requires an average electrical resistance less than 250,000 ohms.
Fully lockable caster.
Weight Capacity: 250 lbs per caster.
Meets Federal Specification FF-C-88C.
P/N 2012-12

Leg Levelers

Get a Quote!

Protective Boots

Boots protect the bottom of leg sections from being chipped or damaged.
Helps make floor cleaning easier by eliminating the need to clean around leg levelers.
Base of boot is open to eliminate interference with leveling function.
Boots are sold individually (two required per leg section).

Adjustable Foot Rest

Ergonomically designed to move in many directions for all-day comfort.
Spacious 18″ x 12″ footpad is covered with non-slip ribbed rubber matting.
Easy to adjust left-right, back-forward, with angular adjustment of the footrest plate.
Available for any workstation platform with open style legs.

Corner Protectors

Typically used on mobile units to protect corners, walls, and other objects during travel.
Corner protectors are sold individually and require drilling into the worksurface to attach.
Corner protectors will not fit on rear corners if Solid Uprights are installed, front corners on Post-Formed work surfaces, or on Epoxy Resing work surfaces.

Mini Corner Guards

Mini Corner Guards are 2-1/4″ x 2-1/4.
Suitable for use on metal work surface corners and will fit many accessories such as shelving, drawer cases, etc.
Available in packs of 4 or 12; adhesive to attach is not included.

Mobile Retrofit Kit

The product choice for converting a Stationary Workstation to a Mobile Workstation.

Installation will require the removal of existing leg extenders; insertion of new extender/caster plate; installation of casters as well as a lower swaybar.

Designed to retrofit Standard and Heavy Duty Workstations.
Retrofit kit accepts all Workplace top plate casters.
Height of workstation will change, dependent on caster choice.
New workheight range for existing 30/37”H Leg sections will be:
- With 3” Casters: 33.25”/40.75”
- With 5” Casters: 35.5”/43”

Get a Quote!