Worksurfaces & Metal Colors

PLASTIC LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.

To specify a standard color Plastic Laminate Top, please use the following codes:

	Color	Post-Formed Front Edge	Standard Edge
	Neutral Glace	PL-01PF	PL-01SQ
	Grey Glace	PL-02PF	PL-02SQ
	Frosty White	PL-03PF	PL-03SQ
	Black	PL-04PF	PL-04SQ
	Fashion Grey	PL-05PF	PL-05SQ
	Non-Standard Color*	PL-00PF	PL-00SQ

*Most Wilsonart International plastic laminate colors are available on special order.
Contact us or call 1-800-258-9700 for assistance.

ESD LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge

The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.

Note: ESD Tops require connection to your earth ground system.

To specify an ESD Laminate Top, please use the following codes:

	Color	Post-Formed Front Edge Order Code	Standard Edge Order Code
	White	ES-03PF	ES-03SQ
	Non-Standard Color*	ES-00PF	ES-00SQ

*Additional ESD laminate colors are available. Contact us or call 1-800-258-9700 for assistance.

CHEMICAL RESISTANT LAMINATE TOPS

With Standard Front Edge

The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.

To specify a Chemical Resistant Laminate Top, please use the following codes:

	Color	Standard Edge Order Code
	Black	CR-04SQ
	Non-Standard Color*	CR-00SQ

*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.

EPOXY RESIN TOPS

Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.

Note: Silicone adhesive is supplied to mount Top.

To specify an Epoxy Resin Top, please use the following code:

	Color	Order Code
	Black	ER-01

*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.

PHENOLIC RESIN TOPS

Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.

Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.

Note: Silicone adhesive is supplied to mount Top.

To specify a Phenolic Resin Top, please use the following code:

	Color	Order Code
	Black	PR-01

*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

MAPLE TOPS

The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top have a ¼” radiused beveled edge.

The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.

Note: Please state if end use is to be for food service or preparation.

To specify a Maple Top, please use the following code:

	Color	Order Code
	Maple	MP-01

STAINLESS STEEL TOPS

The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core.  The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core.  With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.

The standard stainless material is type No. 304 polished finish*.

To specify a Stainless Steel Top, please use the following code:

	Color	Order Code
	Stainless Type 304	SS-01

*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.