A fully integrated solution for mass spectrometry, liquid chromatography, and gas chromatography.
Workplace Mass Spectrometry workstations are the ideal way to house instrumentation and ancillary equipment in a single, well-designed package—perfect for all types of analytical instruments.
The workstation accommodates systems from all popular mass spec and instrumentation suppliers, including:
- Agilent
- Beckman-Coulter
- Shimadzu
- Thermo
- Waters
Specialized features of the Mass Spectroscopy Workstation
From locking casters to resin worksurface, the Mass Spec Workstation is designed from the ground up for convenience and durability—all in an attractive unit that enhances lab appearance.
- Phenolic resin top with an integrated liquid capture system.
- Foam-encased vacuum pump enclosure reduces noise levels.
- Vacuum pump active venting including two fans.
- All-side access to pump via heavy-duty pull-out tray.
- Additional slide-tray for easy access to dispensing tank.
- Casters for mobility and easy access to rear of system.
- Drawers for supply storage (locks optional).
Mass Spec Workstation Design Standards
Workplace has worked with analytic instrument companies such as Waters and Beckman-Coulter to design a robust integrated workstation that meets exacting mechanical, cooling, and electrical standards.
The Workplace Mass Spec Workstation features an impressive array of core design standards:
- Supports in excess of 1,000 pounds of instrumentation and accessories.
- Storage drawers equipped with full-extension, all steel ball bearing slides.
- Standard power features 20 Amp/120 volt electrics with 7-duplex outlets.
- Additional power options available.
- Over-sized phenolic resin top with an integrated liquid capture system.
- Highly durable powder-coat finish and 10 color options.
Mass Spec Workstation Configurations
Available in three sizes, each with three configurations, there’s a Mass Spectroscopy Workstation that accommodates every type of instrument type in every available space.
Consult with your Design Specialist about the one that is right for your instrument and your space. Specific configuration information is in the “Mass Spec Workstations Sizes” at the bottom of the page.
- The 6801 configuration is 31” deep x 42” long.
- The 6802 configuration is 31” deep x 57” long.
- The 6803 configuration is 31” deep x 72” long.
Available Pump Tray Sizes
- Standard pump tray: 20.25”D x 31.12”W
- Large pump tray: 20.25”D x 46”W
Vacuum Pump Enclosure
- Foam-encased vacuum pump enclosure reduces noise levels.
- Vacuum pump active venting including two fans.
- All-side access to pump via heavy-duty pull-out tray.
Mass Spec Workstation Accessories
Accessories available for the Mass Spec Workstation include:
- Computer Caddy
- Articulating Keyboard Arm
- Bottle Tray for dispensing tank
- Specialized Powerstrip
- Powertrough for wiring and tubing
Metal Colors
All Workplace metal products feature a highly durable, environmentally friendly powder-coat finish.
Many other premium colors and color-matching are available, subject to additional charge and lead time.
Download Product InformationConfigurations & Dimensions: 42"L Mass Spec Workstation
To Order, Please Specify Model No. + Color Code + Worksurface Code
| Model No. | Depth | Length | Description |
| 6801-01 | 31” | 42” | Enclosed Double Storage Cabinet |
| 6801-02 | 31” | 42” | Pump Tray and Open Storage Cabinet |
| 6801-03 | 31” | 42” | Pump Tray and Storage Drawers |
- Ships assembled (base unit)
Configurations & Dimensions: 57"L Mass Spec Workstation
To Order, Please Specify Model No. + Color Code + Worksurface Code
| Model No. | Depth | Length | Description |
| 6802-01 | 31” | 57” | Enclosed Double Storage Cabinet |
| 6802-02 | 31” | 57” | Pump Tray and Double Storage Cabinet |
| 6802-03 | 31” | 57” | Double Storage Cabinet and Storage Drawers |
- Ships assembled (base unit)
Standard Dimensions: 72'L Mass Spec Workstation
To Order, Please Specify Model No. + Color Code + Worksurface Code
| Model No. | Depth | Length | Description |
| 6803-01 | 31” | 72” | Pump Tray, Enclosed Double Storage Cabinet and Storage Drawers |
| 6803-02 | 31” | 72” | Pump Tray and Enclosed Double Storage Cabinet |
| 6803-03 | 31” | 72” | Enclosed Double Storage Cabinet |
- Ships assembled (base unit)
Laminate
PLASTIC LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.
To specify a standard color Plastic Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code | Standard Edge Order Code | |
|---|---|---|---|
 | Neutral Glace | PL-01PF | PL-01SQ |
 | Grey Glace | PL-02PF | PL-02SQ |
 | Frosty White | PL-03PF | PL-03SQ |
 | Black | PL-04PF | PL-04SQ |
 | Fashion Grey | PL-05PF | PL-05SQ |
 | Non-Standard Color* | PL-00PF | PL-00SQ |
*Most Wilsonart International plastic laminate colors are available on special order.
Contact us or call 1-800-258-9700 for assistance.
ESD LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.
Note: ESD Tops require connection to your earth ground system.
To specify an ESD Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code | Standard Edge Order Code | |
|---|---|---|---|
 | White | ES-03PF | ES-03SQ |
| Non-Standard Color* | ES-00PF | ES-00SQ |
*Additional ESD laminate colors are available. Contact us or call 1-800-258-9700 for assistance.
CHEMICAL RESISTANT LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.
To specify a Chemical Resistant Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code | Standard Edge Order Code | |
|---|---|---|---|
 | Black | CR-04PF | CR-04SQ |
| Non-Standard Color* | CR-00PF | CR-00SQ |
*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.
Resin
EPOXY RESIN TOPS
Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.
Note: Silicone adhesive is supplied to mount Top.
To specify an Epoxy Resin Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
| Black | ER-01 | |
*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.
Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.
PHENOLIC RESIN TOPS
Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.
Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.
Note: Silicone adhesive is supplied to mount Top.
To specify a Phenolic Resin Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
| Black | PR-01 | |
*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.
Wood
MAPLE TOPS
The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.
The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.
Note: Please state if end use is to be for food service or preparation.
To specify a Maple Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 | Maple | MP-01 | |
Steel
STAINLESS STEEL TOPS
The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core. The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core. With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.
The standard stainless material is type No. 304 polished finish*.
To specify a Stainless Steel Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 | Stainless Type 304 | SS-01 | |
*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.
COLD-ROLLED STEEL TOPS
The Cold-Rolled Steel Tops are designed as an inverted pan top. They are backed with a 1-1/8″ fiberboard. The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.
The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.
To specify a Cold-Rolled Steel Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 | Same as workstation | CS-01 | |
Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.
STANDARD COLORS
| WHITE | Color Code: 0006 |
 | OYSTER | Color Code: 0150 |
 | SILVER GRAY (Semi-Metallic) | Color Code: 0002 |
 | TAN | Color Code: 0001 |
 | CHATEAU BLUE| Color Code: 0015 |
 | MERCURY BLUE | Color Code: 0100 |
 | NAVY BLUE | Color Code: 0900 |
 | BURGUNDY | Color Code: 0950 |
 | BLACK WRINKLE (Textured Finish) | Color Code: 0400 |
 | BLACK (Semi-Gloss) | Color Code: 0018 |
ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.
COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.
IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.
Quick Ship
Quick-Ship does not mean “what we have on hand.” You still get all the advantages of Workplace configured to order workstations. Only faster.
Call Us
Contact a Workplace Modular Systems Design Specialist for friendly assistance with workstation configuration, information, quotes, and support.
Going Mobile
Need extra workspace? Simply move the workstation to wherever you need it, whenever you need it.