When extensive drawer storage is needed, Freestanding Storage combines ample storage capacity with an attractive appearance that works well in labs and any environment where ample storage is required.
Configurations may run from as few as three or four feet to more than fifty feet in length—all in a wide variety of heights, depths, and drawer and hinged door configurations.
Freestanding units may be complemented with wall-mount and corner cabinets.
Banked Cabinet Workstations
The Banked-Cabinet Workstation combines ample storage capacity with an attractive appearance.
Cabinet units, which may be banked, are available in 16″, 24″ and 32″ widths. Custom sizes also available. Configurations are available in a wide variety of lengths. Cabinet height may be 30″ or 36″.
Mobile Cabinet Storage
Depending on storage requirements, single, double, and even triple-bay mobile units may be configured.
Choose from a variety of cabinet heights and depths and a wide selection of drawer combinations.
Mobile cabinet details are in the Accordion Section below.
Sink Cabinets
Add a sink to your freestanding cabinet unit. Choose from a wide selection of sink options labs, educational, or R&D facilities.
Specify sink and faucet size and style with your Design Specialist when configuring the unit.
Standard Wall-Mount Cabinet
- 36″ Wide; 30 High; 12″ Deep
- Choose from hinged metal or sliding metal or glass doors
- Locking cabinet doors
- Adjustable shelving (1 shelf included)
- Available in all 10 standard colors
Available door styles are specified below.
Wall-Mounted Corner Cabinets
- 36″ Wide; 20″ Deep (to corner); 30″ High.
- Hinged metal door
- Adjustable shelving (1 Shelf included).
- Available in all 10 standard colors.
(Shown above with wall-mount cabinet) Available styles are specified in Accordion Section below.
Configuration Assistance
Every freestanding storage situation is unique.
A dedicated Workplace Design Specialist works with you every step of the way to configure exactly the freestanding solution you require.
5" Standard Caster
5″ Standard Caster 
- Standard caster supplied with all Mobile Workstations unless otherwise specified.
- “Total Lock” fully lockable caster.
- Weight Capacity: 250 lbs per caster.
5 Inch Heavy-Duty Caster
5″ Heavy Duty Caster
- Extra wide wheel design.
- “Total Lock” fully lockable caster.
- Weight capacity: 500 lbs per caster.
3 Inch Standard Caster
3″ Standard Caster
- 3″ diameter side lock caster.
- Lowers worksurface by 2″ compared to standard 5″ caster.
- Available for both fixed-height and adjustable height workstations.
- Weight capacity: 250 lbs per caster.
Standard Leveling Caster
Standard Leveling Caster
- Hand-or tool-adjustable leveling.
- Provides low profile clearance (approximately 1/2″) when caster is retracted.
- Lowers worksurface by 2″ compared to standard 5″ caster.
- Available for both fixed-height and adjustable height workstations.
- Working load rating: 550 lbs per caster.
6 Inch Pneumatic Caster
6″ Pneumatic Caster
- 6″ pneumatic caster allows workstation travel over uneven surfaces.
- Raises worksurface by 1″ compared to to standard 5″ caster.
- Stem mounting.
- Requires reinforced leg extender.
High Clearance Leveling Caster
High Clearance Leveling Caster
- Tool-adjustable leveling.
- Requires specialized leg insert to accommodate leveling stem.
- Provides higher clearance (approximately 1 1/2″) when caster is retracted.
- Lowers worksurface by 2″ compared to standard 5″ caster.
- Working load rating: 550 lbs per caster.
5 Inch ESD Caster
5″ ESD Caster
- “Total Lock” fully lockable caster.
- Weight Capacity: 250 lbs per caster.
- Meets Federal Specification FF-C-88C.
- Requires an average electrical resistance less than 250,000 ohms.
Laminate
PLASTIC LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.
To specify a standard color Plastic Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code | Standard Edge Order Code | |
|---|---|---|---|
 | Neutral Glace | PL-01PF | PL-01SQ |
 | Grey Glace | PL-02PF | PL-02SQ |
 | Frosty White | PL-03PF | PL-03SQ |
 | Black | PL-04PF | PL-04SQ |
 | Fashion Grey | PL-05PF | PL-05SQ |
 | Non-Standard Color* | PL-00PF | PL-00SQ |
*Most Wilsonart International plastic laminate colors are available. Please call 1-800-258-9700 for assistance.
ESD LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.
Note: ESD Tops require connection to your earth ground system.
To specify an ESD Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code | Standard Edge Order Code | |
|---|---|---|---|
 | White | ES-03PF | ES-03SQ |
| Non-Standard Color* | ES-00PF | ES-00SQ |
*Additional ESD laminate colors are available. Please call 1-800-258-9700 for assistance.
CHEMICAL RESISTANT LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.
To specify a Chemical Resistant Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code | Standard Edge Order Code | |
|---|---|---|---|
 | Black | CR-04PF | CR-04SQ |
| Non-Standard Color* | CR-00PF | CR-00SQ |
*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.
Resin
EPOXY RESIN TOPS
Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.
Note: Silicone adhesive is supplied to mount Top.
To specify an Epoxy Resin Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
| Black | ER-01 | |
*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.
Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.
PHENOLIC RESIN TOPS
Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.
Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.
Note: Silicone adhesive is supplied to mount Top.
To specify a Phenolic Resin Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
| Black | PR-01 | |
*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.
Wood
MAPLE TOPS
The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.
The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.
Note: Please state if end use is to be for food service or preparation.
To specify a Maple Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 | Maple | MP-01 | |
Steel
STAINLESS STEEL TOPS
The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core. The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core. With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.
The standard stainless material is type No. 304 polished finish*.
To specify a Stainless Steel Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 | Stainless Type 304 | SS-01 | |
*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.
COLD-ROLLED STEEL TOPS
The Cold-Rolled Steel Tops are designed as an inverted pan top. They are backed with a 1-1/8″ fiberboard. The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.
The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.
To specify a Cold-Rolled Steel Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 | Same as workstation | CS-01 | |
Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.
STANDARD COLORS
| WHITE | Color Code: 0006 |
 | OYSTER | Color Code: 0150 |
 | SILVER GRAY (Semi-Metallic) | Color Code: 0002 |
 | TAN | Color Code: 0001 |
 | CHATEAU BLUE| Color Code: 0015 |
 | MERCURY BLUE | Color Code: 0100 |
 | NAVY BLUE | Color Code: 0900 |
 | BURGUNDY | Color Code: 0950 |
 | BLACK WRINKLE (Textured Finish) | Color Code: 0400 |
 | BLACK (Semi-Gloss) | Color Code: 0018 |
ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.
COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.
IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.
Quick Ship
Quick-Ship does not mean “what we have on hand.” You still get all the advantages of Workplace configured to order workstations. Only faster.
Call Us
Contact a Workplace Modular Systems Design Specialist for friendly assistance with workstation configuration, information, quotes, and support.
Going Mobile
Need extra workspace? Simply move the workstation to wherever you need it, whenever you need it.