Cabinet Workstations and Benches
Cabinet Workstations deliver maximum value and utility in an attractive package featuring generous storage.
Rugged and attractively styled, Workplace cabinet workstations and benches are ideal for task-intensive functions that require flexible storage space and a useful work area all contained in one efficient work center.
Choose your cabinet height, length, and depth. Then choose from a wide selection of drawer heights, and configurations as well as over-table accessories.
Click here to download a PDF of available cabinet configurations.
Cabinet-to-Cabinet Workstations
The Cabinet-to-Cabinet Workstation provides significant drawer storage in a space-saving single unit design. Available in a wide range of sizes and in many different drawer configurations, the Cabinet-to-Cabinet Workstation will easily accommodate your specific needs.
Cabinet-to-Leg Workstations
When less drawer storage space is required, the Cabinet-to-Leg Station provides the best of both worlds.
The cab-to-leg unit is configured with a single cabinet, a leg section, and a durable full-perimeter frame to fully support the worksurface—an important feature not often found on competitors’ workstations.
Mobile Cabinet Workstations
For those applications where it’s more efficient to move the workstation to the job, rather than the job to the workstation, a Mobile Cabinet Workstation is the solution.
Depending on storage requirements, single, double, and even triple-cabinet mobile units may be configured.
In-Line Cabinet Workstations
For continuous line work—or where floor space is at a premium—the In-Line Cabinet Workstation delivers maximum worksurface area and ample drawer storage exactly where it is needed.
Choose from seated or standing height cabinets, all with a variety of drawer configurations. Leg sections and cabinets can also be mixed and matched as needed. When requirements change, existing modules may be repurposed and combined with new components to create entirely new configurations.
Banked Cabinet Workstations
When extensive drawer storage is needed, the Banked-Cabinet Workstation combines ample storage capacity with an attractive appearance.
Configurations can run from as few as four feet to more than fifty feet—all in a wide variety of heights, depths, widths, and drawer configurations.
Add-On Accessories
Complement your Cabinet Workstations and Benches with power, lighting, organization, and computer-related accessories from a wide variety of overtable accessories to create the perfect task environment.
For a 24"D x 30"H Workstation
Cabinet Drawer Dimensions:
Small Drawer: 2-13/16H x 13-3/4″W (ID)
Medium Drawers: 5-3/4″H x 13-3/4″W (ID)
Large Drawers: 11-5/8″H x 13-3/4″W (ID)
Depth (ID) of 23″D Cabinet is 20-1/2″
For a 30"D x 30"H Workstation
Cabinet Drawer Dimensions:
Small Drawer: 2-13/16H x 13-3/4″W (ID)
Medium Drawers: 5-3/4″H x 13-3/4″W (ID)
Large Drawers: 11-5/8″H x 13-3/4″W (ID)
Depth (ID) of 29″D Cabinet is 26-1/2″
For a 30"D x 36"H Workstation
Cabinet Drawer Dimensions:
Small Drawer: 2-13/16H x 13-3/4″W (ID)
Medium Drawers: 5-3/4″H x 13-3/4″W (ID)
Large Drawers: 11-5/8″H x 13-3/4″W (ID)
Depth (ID) of 29″D Cabinet is 26-1/2″
Double Cabinets
Double Cabinet Dimensions:
35″H x 32-3/4″W x 29″D
N7090 Includes on Drawer (26″D x 29-7/8″W x 4″H ID)
N7090-02 Designed for optional sink mount
Cabinet-to-Cabinet Workstations
To Order, Please Specify Model No. + two Cabinets + Color Code + Worksurface Code + Accessories
Other Options:
- ADDITIONAL SIZES (lengths up to 96″)
- Variety of work height ranges
- Assembly options
| STANDARD SIZES | ||||
| Model No. | Depth | Length | Height with Type A or B Cabinets | Height with Type C Cabinets |
| A70CC2460 | 24″ | 60″ | 30″ | N/A |
| A70CC2472 | 24″ | 72″ | 30″ | N/A |
| A70CC3060 | 30″ | 60″ | 30″ | 36″ |
| A70CC3072 | 30″ | 72″ | 30″ | 36″ |
| A70CC3660 | 36″ | 60″ | 30″ | 36″ |
| A70CC3672 | 36″ | 72″ | 30″ | 36″ |
Cabinet-to-Leg Workstations
To Order, Please Specify Model No. + Color Code + Worksurface Code.
Other Options:
- ADDITIONAL SIZES (lengths up to 96″)
- Variety of work height ranges
- Assembly options
| STANDARD SIZES | ||||
| Model No. | Depth | Length | Height with Type A or B Cabinets | Height with Type C Cabinets |
| A74CL2448 | 24″ | 48″ | 30″ | N/A |
| A74CL2460 | 24″ | 60″ | 30″ | N/A |
| A74CL2472 | 24″ | 72″ | 30″ | N/A |
| A74CL3048 | 30″ | 48″ | 30″ | 36″ |
| A74CL3060 | 30″ | 60″ | 30″ | 36″ |
| A74CL3072 | 30″ | 72″ | 30″ | 36″ |
| A74CL3648 | 36″ | 48″ | 30″ | 36″ |
| A74CL3660 | 36″ | 60″ | 30″ | 36″ |
| A74CL3672 | 36″ | 72″ | 30″ | 36″ |
Configuring Banked Cabinet Workstations
Please call your Workplace Design Specialist for assistance in the design of your Banked Cabinet Row.
The configuration of your Banked Cabinet Row will depend in large part depend on the total row length required, together with the specific cabinet configuration required. Please provide this information as part of your discussion with your Design Specialist.
Configuring In-Line Rows of Cabinet Workstations
Please call your Workplace Design Specialist at 1-800-258-9700 for assistance in the design of your In-Line Row. The following guidelines may be helpful in the planning of your In-Line units:
- An in-line row consists of a “Starter” station, followed by any number of “Intermediate” stations.
- Standard sizes for both Starter and Intermediate stations are 24″, 30″, or 36″ depths x 48″, 60″, or 72″ lengths.
- All tables in a single row must be of the same depth, but may be of different lengths.
- In-Line rows may be as short as 2 stations, or as long as you have room for. In-Line rows may consists of your choice of a Leg Section or a Cabinet at starting, ending, or intermediate positions, as well as recessed legs.
- Each table in a row may be equipped with as few or as many Series 3000 Accessories as needed for your application.
- Additional and Custom sizes are also available, however we recommend the use of standard sizes whenever possible to allow broadest and most cost-effective use of Series 3000 Accessories.
Configuring L-shaped or U-shaped Cabinet Workstations
Please refer below to the illustration of possible corner configurations as an assist during your discussion with your Design Specialist:
Mobile Units
Mobile Cabinet units are available as a Single-Cabinet unit, a Double-Cabinet (with center space/opening) unit, or as a Double or Triple Cabinet (banked) unit.
All drawers in Cabinets open 100% for full use of storage space. A 3” high base with a 2” recessed toe space assures operator
comfort. Cabinets may be specified in two different heights and two different depths to satisfy the most discriminating demand. Drawers may be equipped with locks (keyed per your specifications) either at time of purchase or in the future.- The Cabinet-to-Cabinet or Cabinet-to-Leg Frame (2) provides support for your selected worksurface, an important feature not often found with other cabinet workstations on the market.
- End caps (3) are provided to enclose the open ends of the 2”x2” tubular framework of the Cabinet-to-Leg Workstation.
- The Cabinet-to-Leg Station is equipped with a Rear Swaybrace for additional protection against lateral sway.
- Single Mobile Cabinets are mounted to a Mobile Cabinet Base. The 3” high Cabinet base is not utilized in this configuration.
- The Cabinets on a Double or Triple Cabinet Mobile unit are mounted within a pan-type base to which the Casters are mounted. The 3” Cabinet bases are utilized in this configuration.
Laminate
PLASTIC LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.
To specify a standard color Plastic Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code |
Standard Edge Order Code |
|
|---|---|---|---|
 |
Neutral Glace | PL-01PF | PL-01SQ |
 |
Grey Glace | PL-02PF | PL-02SQ |
 |
Frosty White | PL-03PF | PL-03SQ |
 |
Black | PL-04PF | PL-04SQ |
 |
Fashion Grey | PL-05PF | PL-05SQ |
 |
Non-Standard Color* | PL-00PF | PL-00SQ |
*Most Wilsonart International plastic laminate colors are available. Please call 1-800-258-9700 for assistance.
ESD LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.
Note: ESD Tops require connection to your earth ground system.
To specify an ESD Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code |
Standard Edge Order Code |
|
|---|---|---|---|
 |
White | ES-03PF | ES-03SQ |
|
Non-Standard Color* | ES-00PF | ES-00SQ |
*Additional ESD laminate colors are available. Please call 1-800-258-9700 for assistance.
CHEMICAL RESISTANT LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.
To specify a Chemical Resistant Laminate Top, please use the following codes:
| Color | Post-Formed Front Edge Order Code |
Standard Edge Order Code |
|
|---|---|---|---|
 |
Black | CR-04PF | CR-04SQ |
|
Non-Standard Color* | CR-00PF | CR-00SQ |
*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.
Resin
EPOXY RESIN TOPS
Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.
Note: Silicone adhesive is supplied to mount Top.
To specify an Epoxy Resin Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
|
Black | ER-01 | |
*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.
Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.
PHENOLIC RESIN TOPS
Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.
Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.
Note: Silicone adhesive is supplied to mount Top.
To specify a Phenolic Resin Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
|
Black | PR-01 | |
*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.
Wood
MAPLE TOPS
The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.
The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.
Note: Please state if end use is to be for food service or preparation.
To specify a Maple Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 |
Maple | MP-01 | |
Steel
STAINLESS STEEL TOPS
The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core. The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core. With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.
The standard stainless material is type No. 304 polished finish*.
To specify a Stainless Steel Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 |
Stainless Type 304 | SS-01 | |
*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.
COLD-ROLLED STEEL TOPS
The Cold-Rolled Steel Tops are designed as an inverted pan top. They are backed with a 1-1/8″ fiberboard. The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.
The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.
To specify a Cold-Rolled Steel Top, please use the following code:
| Color | Order Code | ||
|---|---|---|---|
 |
Same as workstation | CS-01 | |
Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.
STANDARD COLORS
 |
TAN | Color Code: 0001 |
 |
CHATEAU BLUE | Color Code: 0015 |
 |
SILVER GRAY (Semi-Metallic) | Color Code: 0002 |
 |
BLACK WRINKLE (Textured Finish) | Color Code: 0400 |
 |
MERCURY BLUE | Color Code: 0100 |
 |
OYSTER | Color Code: 0150 |
|
WHITE | Color Code: 0006 |
 |
NAVY BLUE | Color Code: 0900 |
 |
BURGUNDY | Color Code: 0950 |
 |
BLACK (Semi-Gloss) | Color Code: 0018 |
ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.
COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.
IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.
Quick Ship
Quick-Ship does not mean “what we have on hand.” You still get all the advantages of Workplace configured to order workstations. Only faster.
Call Us
Contact a Workplace Modular Systems Design Specialist for friendly assistance with workstation configuration, information, quotes, and support.
Going Mobile
Need extra workspace? Simply move the workstation to wherever you need it, whenever you need it.
