Cabinet-to-Cabinet Workstation

Workplace Cabinet Workstations are idea for task-intensive functions requiring ample storage space topped by a useable work area.

Available in a wide array of configurations, Cabinet Workstations deliver maximum value and utility. Its attractive yet rugged construction features generous storage for tools, test equipment or reference materials.

Select from a variety of heights, depths, drawer and door combinations as well as add-on accessories.

 Download Cabinet Configuration Information

Cabinet-to-Cabinet Workstations

The Cabinet-to-Cabinet Workstation provides significant drawer storage in a space-saving single unit design.

Download Product Information

Cabinet-to-Leg Workstations

This unit is configured with a single cabinet, a leg section, and a durable full-perimeter frame to fully support the worksurface.

Download Product Information

Banked Cabinet Workstations

The Banked-Cabinet Workstation combines ample storage capacity with an attractive appearance. Configurations may range from as few as four feet to more than fifty feet.

Download Product Information

In-Line & Corner Cabinet Workstations

Where floor space is at a premium an In-Line or Corner Cabinet Workstation features maximum working area and ample drawer storage.

Download In-Line Product Information

 Download Corner Product Information

Sink Cabinets

Choose from a wide selection of sink options labs, educational, or R&D facilities.

Specify sink and faucet size and style with your Design Specialist when configuring the unit.

Accessories & Seating

Complement your Cabinet Workstations and Benches with ergonomic seating, and a wide variety of accessories to create the perfect task environment.

 Download Seating Information

For a 24"D x 30"H Workstation

Cabinet Drawer Dimensions:
Small Drawer:            2-13/16H x 13-3/4″W (ID)
Medium Drawers:     5-3/4″H x 13-3/4″W (ID)
Large Drawers:          11-5/8″H x 13-3/4″W (ID)

Depth (ID) of 23″D Cabinet is 20-1/2″

For a 30"D x 30"H Workstation

Cabinet Drawer Dimensions:
Small Drawer:            2-13/16H x 13-3/4″W (ID)
Medium Drawers:     5-3/4″H x 13-3/4″W (ID)
Large Drawers:          11-5/8″H x 13-3/4″W (ID)

Depth (ID) of 29″D Cabinet is 26-1/2″

For a 30"D x 36"H Workstation

032B-4_30x36Cabs2

Cabinet Drawer Dimensions:
Small Drawer:            2-13/16H x 13-3/4″W (ID)
Medium Drawers:     5-3/4″H x 13-3/4″W (ID)
Large Drawers:          11-5/8″H x 13-3/4″W (ID)

Depth (ID) of 29″D Cabinet is 26-1/2″

Double Cabinets

032B-5_DBL Cabs

Double Cabinet Dimensions:
35″H x 32-3/4″W x 29″D

N7090          Includes on Drawer (26″D x 29-7/8″W x 4″H ID)
N7090-02     Designed for optional sink mount

Please refer below to the illustration of possible corner configurations as an assist during your discussion with your Design Specialist:

     

  1. 7000-14All drawers in Cabinets open 100% for full use of storage space. A 3” high base with a 2” recessed toe space assures operator
    comfort. Cabinets may be specified in two different heights and two different depths to satisfy the most discriminating demand. Drawers may be equipped with locks (keyed per your specifications) either at time of purchase or in the future.
  2. The Cabinet-to-Cabinet or Cabinet-to-Leg Frame (2) provides support for your selected worksurface, an important feature not often found with other cabinet workstations on the market.
  3. End caps (3) are provided to enclose the open ends of the 2”x2” tubular framework of the Cabinet-to-Leg Workstation.
  4. The Cabinet-to-Leg Station is equipped with a Rear Swaybrace for additional protection against lateral sway.
  5. Single Mobile Cabinets are mounted to a Mobile Cabinet Base. The 3” high Cabinet base is not utilized in this configuration.
  6. The Cabinets on a Double or Triple Cabinet Mobile unit are mounted within a pan-type base to which the Casters are mounted. The 3” Cabinet bases are utilized in this configuration.

7000-5     7000-2    7000-7      7000-9

Laminate

PLASTIC LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.

To specify a standard color Plastic Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
Neutral Glace PL-01PF PL-01SQ
Grey Glace PL-02PF PL-02SQ
Frosty White PL-03PF PL-03SQ
Black PL-04PF PL-04SQ
Fashion Grey PL-05PF PL-05SQ
Non-Standard Color* PL-00PF PL-00SQ

*Most Wilsonart International plastic laminate colors are available. Please call 1-800-258-9700 for assistance.


ESD LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.

Note: ESD Tops require connection to your earth ground system.

To specify an ESD Laminate Top, please use the following codes:

 

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
White ES-03PF ES-03SQ
Non-Standard Color* ES-00PF ES-00SQ

*Additional ESD laminate colors are available. Please call 1-800-258-9700 for assistance.


CHEMICAL RESISTANT LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.

To specify a Chemical Resistant Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
Black CR-04PF CR-04SQ
Non-Standard Color* CR-00PF CR-00SQ

*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.

Resin

EPOXY RESIN TOPS

Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.

Note: Silicone adhesive is supplied to mount Top.

To specify an Epoxy Resin Top, please use the following code:

Color Order Code
Black ER-01

 

*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.


PHENOLIC RESIN TOPS

Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.

Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.

Note: Silicone adhesive is supplied to mount Top.

To specify a Phenolic Resin Top, please use the following code:

Color Order Code
Black PR-01

*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Wood

MAPLE TOPS

The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.

The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.

Note: Please state if end use is to be for food service or preparation.

To specify a Maple Top, please use the following code:

Color Order Code
Maple MP-01

Steel

STAINLESS STEEL TOPS

The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core.  The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core.  With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.

The standard stainless material is type No. 304 polished finish*.

To specify a Stainless Steel Top, please use the following code:

Color Order Code
Stainless Type 304 SS-01

 

*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.


COLD-ROLLED STEEL TOPS

The Cold-Rolled Steel Tops are designed as an inverted pan top.  They are backed with a 1-1/8″ fiberboard.  The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.

The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.

To specify a Cold-Rolled Steel Top, please use the following code:

Color Order Code
Same as workstation CS-01

Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.

STANDARD COLORS

WHITE | Color Code: 0006
OYSTER | Color Code: 0150
SILVER GRAY (Semi-Metallic) | Color Code: 0002
TAN | Color Code: 0001
CHATEAU BLUE| Color Code: 0015
MERCURY BLUE | Color Code: 0100
NAVY BLUE | Color Code: 0900
BURGUNDY | Color Code: 0950
BLACK WRINKLE (Textured Finish) | Color Code: 0400
BLACK (Semi-Gloss) | Color Code: 0018

ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.

COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.

IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.

ship

Quick Ship

Quick-Ship does not mean “what we have on hand.” You still get all the advantages of Workplace configured to order workstations. Only faster.

More Info

Call Us

Contact a Workplace Modular Systems Design Specialist for friendly assistance with workstation configuration, information, quotes, and support.

Connect

Mobile

Going Mobile

Need extra workspace? Simply move the workstation to wherever you need it, whenever you need it.

Our Mobile Models