Choose from these worksurfaces for your Quick-Ship custom-configured workstation.
PLASTIC LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge
The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable fiberboard is covered with a plastic laminate surface sheet and PVC edging. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.
To specify a standard color Plastic Laminate Top, please use the following codes:
PHENOLIC RESIN TOPS
Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.
Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.
To specify a Phenolic Resin Top, please use the following code:
Color | Order Code | ||
---|---|---|---|
![]() | Black | PR-01 |
MAPLE TOPS
The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the wooden maple rails on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.
The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.
Note: Please state if end use is to be for food service or preparation.
To specify a Maple Top, please use the following code:
Color | Order Code | ||
---|---|---|---|
![]() | Maple | MP-01 |