Versatile Corner Workstations are ideal for space-constrained environments.Corner-1

They are also especially useful for work functions requiring more surface area than found with conventional table-sized workstations

There are three distinct types of corner worktable styles.  The simplest corner workstation is an L-Shape unit, consisting of two heavy-duty tables. Or, you can choose from the Series ‘A’ corner or Series ‘B’ corner workstations.

These can be configured into hundreds of design possibilities, depending on size and storage requirements. As with other Workplace products, you can equip your base unit with the accessories needed for the task at hand.

Corner Workstation Features

  • Rugged all-metal structural framework.
  • Adjustable work height: 30” to 37” or 35” to 42.”
  • Optional privacy panels on outer leg sections.
  • Your choice of worksurface material and a choice of ten frame colors.
  • Optional circular cut-outs/caps for power access.

L-Shape Workstation

The L-Shape Workstation combines two individual workstations, where frames have been bolted together, removing the need for a leg section and providing clear leg room.

Corner-3Series ‘A’ Corner Workstation

The Series A features a 7’ by 7’ base unit. Multiples of the base unit can be arranged in a variety of configurations.

Series ‘B’ Corner WorkstationCorner-2

The Series B Corner Workstation starts with a 4’ x 4’ center/corner unit. Just add left and right wing units, available in 4’, 5’ or 6’ lengths.

Series B units may be equipped with Leg Sections, Cabinets, or a combination of both.

Corner-3Add-On Accessories

Complement your Corner Workstation with a wide variety of Add-On Accessories to create the perfect work environment.

Choose from under-table, over-table, computer-related and a host of other general accessories

L-Shape Workstation: Configurations

Please call your Workplace Design Specialist at 1-800-258-9700 for assistance in the design of your L-Shape Workstation, please refer to the illustration below.

1000LS        LSHAPES1000

Corner Workstation: "A" Configuration

5300-APlease call your Workplace Design Specialist at 1-800-258-9700 for assistance in the design of your “A” configuration Corner Workstation.

The following guidelines may be helpful in the planning of your Corner Workstation:

  • Standard 7′ x 7′ units may be positioned as free-standing units in the configuration shown at right.
  • Accessories sized to fit the 7′ x 7′ unit include Fixed Riser Shelves, Powerstrips, and optional cut-outs with caps for power access.

Corner Workstation: "B" Configuration

5300-BPlease call your Workplace Design Specialist at 1-800-258-9700 for assistance in the design of your “B” configuration Corner Workstation.

The following guidelines may be helpful in the planning of your Quad WorkCenter:

  • The dimensions of the “starter” center/corner unit are 4′ x 4′.
  • Moving out from each end of the starter unit, it is typical to add one or more units, usually in lengths of 4′, 5′, or 6′.
  • Left and right wings may include Cabinet or Leg supports, or a combination of both. Abutting in-line frames/units will share a common Leg or Cabinet support.
  • Search Design Ideas Database for many different Quad configuration ideas.

Corner Workstation Construction Details

5300EX1. Rugged all-metal structural framework provides stability and overall support of selected worksurface.

2. Leg Sections feature manual height adjustment range of 30” up to 37” workheight.

3. Corner frame creates a useful, comfortable work area and provides additional support of corner worksurface.

4. Optional power access cutouts with grommets and caps provide convenient and neat access for power and cabling cords.

5. Swaybrace provides additional stability to help prevent against lateral sway.

Laminate

PLASTIC LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge

The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.

To specify a standard color Plastic Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
Neutral Glace PL-01PF PL-01SQ
Grey Glace PL-02PF PL-02SQ
Frosty White PL-03PF PL-03SQ
Black PL-04PF PL-04SQ
Fashion Grey PL-05PF PL-05SQ
Non-Standard Color* PL-00PF PL-00SQ

*Most Wilsonart International plastic laminate colors are available. Please call 1-800-258-9700 for assistance.


ESD LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge

The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.

Note: ESD Tops require connection to your earth ground system.

To specify an ESD Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
White ES-03PF ES-03SQ
Non-Standard Color* ES-00PF ES-00SQ

*Additional ESD laminate colors are available. Please call 1-800-258-9700 for assistance.


CHEMICAL RESISTANT LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge

The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.

To specify a Chemical Resistant Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
Black CR-04PF CR-04SQ
Non-Standard Color* CR-00PF CR-00SQ

*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.

Resin

EPOXY RESIN TOPS

Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.

Note: Silicone adhesive is supplied to mount Top.

To specify an Epoxy Resin Top, please use the following code:

Color Order Code
Black ER-01

 

*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.


PHENOLIC RESIN TOPS

Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.

Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.

Note: Silicone adhesive is supplies to mount Top.

To specify a Phenolic Resin Top, please use the following code:

Color Order Code
Black PR-01

*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Wood

MAPLE TOPS

The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.

The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.

Note: Please state if end use is to be for food service or preparation.

To specify a Maple Top, please use the following code:

Color Order Code
Maple MP-01

Steel

STAINLESS STEEL TOPS

The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core.  The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core.  With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.

The standard stainless material is type No. 304 polished finish*.

To specify a Stainless Steel Top, please use the following code:

Color Order Code
Stainless Type 304 SS-01

 

*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.


COLD-ROLLED STEEL TOPS

The Cold-Rolled Steel Tops are designed as an inverted pan top.  They are backed with a 1-1/8″ fiberboard.  The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.

The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.

To specify a Cold-Rolled Steel Top, please use the following code:

Color Order Code
Same as workstation CS-01

Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.

STANDARD COLORS

TAN | Color Code: 0001
CHATEAU BLUE| Color Code: 0015
SILVER GRAY (Semi-Metallic) | Color Code: 0002
BLACK WRINKLE (Textured Finish) | Color Code: 0400
MERCURY BLUE | Color Code: 0100
OYSTER | Color Code: 0150
WHITE | Color Code: 0004
NAVY BLUE | Color Code: 0900
BURGUNDY | Color Code: 0950
BLACK (Semi-Gloss) | Color Code: 0018

 

ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.

COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.

IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.

Need Ideas?

It’s easy to transform your work area using hundreds of design ideas found in our idea generator.  This is just a starting point – add or remove components to suit your specific needs.

Idea Generator

contact1

How to Order

It’s the human touch that matters. That’s why you’ll want to connect with one of our Design Specialists Monday through Friday, 8 a.m. to 5 p.m. Eastern Time.

Connect