Make your workstation mobile.

Move the bench, table, or workstation right to the task wherever and whenever needed. Every Workplace platform—standard, heavy-duty, motorized, or cabinet—can be a custom mobile workstation.

Mobile retrofit kits let you transform stationary benches into portable workstations. Custom mobile workstations are also available.

Choose from a wide variety of caster options: 5″, 3″, High-Clearance Leveling, Pneumatic, Heavy-Duty, and ESD. Details are in the accordion section at the bottom of this page.

Mobile Standard Workstation

It’s the ultimate portable workstation and accepts every accessory. Includes provisions to mount an under table shelf or lower swaybar for added stability. Workstation height may be adjusted in 1-1/2″ increments  Contact a Design Specialist for more information.

More information about Standard Workstations.

Mobile Heavy-Duty Workstation

Leg sections are constructed of 2″ square 18 gauge furniture-grade tubing, a channel caster base, and provisions to mount an under-table shelf or swaybar for added stability. Workstation height may be adjusted in 1-1/2″ increments and accepts all accessories.

Requires a different style leg than a stationary unit and the correct caster for the application. Contact a Design Specialist for more information.

More information about Heavy-Duty Workstations

Mobile Motorized Height-Adjustable Workstation

The Motorized Height-Adjustable Workstation can be both mobile and stationary simply by adding a caster kit to its standard leg sections. The workstation becomes mobile when legs are set to their lowest position.

More information about Motorized Height-Adjustable Workstations

Mobile Cabinet Workstation

Configuring your cabinet workstation to be portable requires adding a mobile base, which provides maximum stability. Single, double, and even triple-cabinet custom mobile units are available. Specific casters may be selected based on the application requirements.

More information about Cabinet Workstations

Caster Options

Choose from a wide range of caster sizes, locking and leveling features suitable for a variety of applications. Details and specifications in the accordion section at the bottom of this page.

Mobile Retrofit Kit

All standard casters may be retrofitted on site to all stationary Standard and Heavy Duty Workstations unless otherwise specified. Details and specifications in the accordion section at the bottom of this page.

Metal Colors

All Workplace metal products feature a highly durable, environmentally friendly powder-coat finish.

Many other premium colors and color-matching are available, subject to additional charge and lead time.

 Download Product Information

Worksurfaces

Eight different worksurface materials and nine standard tabletop sizes satisfy virtually every task requirement.

But if one of them doesn’t, Workplace is happy to quote the exact dimensions needed.

 Download Product Information

Value-Added Services

A dedicated Workplace Design Specialist works with you every step of the way—from configuration and quote to life-of-the-product service.

Available services include engineering design, space layout, assembly and installation.

Download Service Information

5-inch Standard Caster

5-inch Standard Caster

  • Standard caster supplied with all Mobile Workstations unless otherwise specified.
  • “Total Lock” fully lockable caster.
  • Weight Capacity: 250 lbs per caster.

5-inch Heavy-Duty Caster

5″ Heavy Duty Caster

  • Extra wide wheel design.
  • “Total Lock” fully lockable caster.
  • Weight capacity: 500 lbs per caster.

3-inch Standard Caster

3″ Standard Caster

  • 3″ diameter side lock caster.
  • Lowers worksurface by 2″ compared to standard 5″ caster.
  • Available for both fixed-height and adjustable height workstations.
  • Weight capacity: 250 lbs per caster.

Standard Leveling Caster

Standard Leveling Caster

  • Hand-or tool-adjustable leveling.
  • Provides low profile clearance (approximately 1/2″) when caster is retracted.
  • Lowers worksurface by 2″ compared to standard 5″ caster.
  • Available for both fixed-height and adjustable height workstations.
  • Working load rating: 550 lbs per caster.

6 Inch Pneumatic Caster

6″ Pneumatic Caster

  • 6″ pneumatic caster allows workstation travel over uneven surfaces.
  • Raises worksurface by 1″ compared to to standard 5″ caster.
  • Stem mounting.
  • Requires reinforced leg extender.

High Clearance Leveling Caster

High Clearance Leveling Caster

  • Tool-adjustable leveling.
  • Requires specialized leg insert to accommodate leveling stem.
  • Provides higher clearance (approximately 1 1/2″) when caster is retracted.
  • Lowers worksurface by 2″ compared to standard 5″ caster.
  • Working load rating: 550 lbs per caster.

5 Inch ESD Caster

 5″ ESD Caster

  • “Total Lock” fully lockable caster.
  • Weight Capacity: 250 lbs per caster.
  • Meets Federal Specification FF-C-88C.
  • Requires an average electrical resistance less than 250,000 ohms.

Installation of a Mobile Retrofit Kit requires removal of existing leg extenders; insertion of new caster plate assemblies; and installation of casters as well as a swaybar for Standard Workstations.

  • May be retrofitted on site to all stationary Standard and Heavy-Duty Workstations unless otherwise specified.
  • Retrofit kit accepts all standard casters.
  • Will affect Stationary Workstation work height depending on caster selected.
  • Work height range based on use of existing 30″/37″ WH Leg Sections will be:
    — With 3″ Casters: 33.25″/ 40.75″
    — With 5″ Casters: 35.5″/43″

Contact your Design Specialist for details.

Laminate

PLASTIC LAMINATE TOPS

With Post-Formed Front Edge or Standard Front Edge

The 1-1/16” thick Plastic Laminate Top features an easy-to-clean surface for many general purpose applications. A core of 1” dimensionally stable flakeboard is covered with a plastic laminate surface sheet and edging of .039” thick high-pressure laminate. In addition, a plastic laminate backer sheet of approx. .020” thickness covers the underside of the core stock and ¼-20 metal inserts are located in the underside of the tops for ease of fastening to many of the Workplace frames. The resulting top is a well-balanced, long-lasting work surface.

To specify a standard color Plastic Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
Neutral Glace PL-01PF PL-01SQ
Grey Glace PL-02PF PL-02SQ
Frosty White PL-03PF PL-03SQ
Black PL-04PF PL-04SQ
Fashion Grey PL-05PF PL-05SQ
Non-Standard Color* PL-00PF PL-00SQ

*Most Wilsonart International plastic laminate colors are available on special order.
Contact us or call 1-800-258-9700 for assistance.


ESD LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge

The ESD Tops feature ESD Laminate, a decorative, clean, amino resin laminate which rapidly dissipates static electrical charges, and is recommended for use in areas which must be free of static electrical charges. The ESD Top is equipped with a flush-mount grounding system (factory-installed) with grounding hardware located on the underside of the Top. A flush-mount grounding bolt is located in the top of the worksurface (at the rear). The flush-mount ground system also includes two banana plugs set flush in the front edge for convenient connection of customer-supplied wrist straps. The ESD Top is fabricated with a dimensionally stable 1” flakeboard used as core stock, with a surface sheet of ESD Laminate covering the top surface and all edges. A plastic laminate backing sheet of at least .020” thickness covers the underside of the top.

Note: ESD Tops require connection to your earth ground system.

To specify an ESD Laminate Top, please use the following codes:

 

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
White ES-03PF ES-03SQ
Non-Standard Color* ES-00PF ES-00SQ

*Additional ESD laminate colors are available. Contact us or call 1-800-258-9700 for assistance.


CHEMICAL RESISTANT LAMINATE TOPS
With Post-Formed Front Edge or Standard Front Edge

The Chemical Resistant Laminate Tops are fabricated in the same manner as the Plastic Laminate Tops. The laminate is a high-pressure decorative laminate recommended for use where accidental spillage of chemical reagents is likely to occur.

To specify a Chemical Resistant Laminate Top, please use the following codes:

Color Post-Formed Front
Edge Order Code
Standard Edge
Order Code
Black CR-04PF CR-04SQ
Non-Standard Color* CR-00PF CR-00SQ

*Additional Chemical Resistant Top colors available. Please call 1-800-258-9700 for assistance.

Resin

EPOXY RESIN TOPS

Epoxy Resin Tops are molded from a modified epoxy resin that has been especially compounded and cured to provide optimum physical and chemical resistance required for a heavy duty laboratory working surface. Tops are 1” in thickness with a drip groove provided on the underside of exposed edges; all finished edges have a slight bevel. Sinks and service fixtures are also available upon request.

Note: Silicone adhesive is supplied to mount Top.

To specify an Epoxy Resin Top, please use the following code:

Color Order Code
Black ER-01

 

*Additional Epoxy Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Note: Add-on Accessories, that suspend from framework (i.e. hanging drawer, keyboard tray, CPU Caddy, etc.) may not be added to workstation after Resin Top is cemented to framework.


PHENOLIC RESIN TOPS

Phenolic Resin Tops provide a homogeneous blend of modified phenolic resins fused together under high pressure and heat in specially designed thermoset press molds to form a solid black chemical resistant composite throughout the entire thickness of the top.

Tops are 1” in thickness with a drip groove provided on the underside of the exposed edges.

Note: Silicone adhesive is supplied to mount Top.

To specify a Phenolic Resin Top, please use the following code:

Color Order Code
Black PR-01

*Additional Phenolic Resin Top colors are available by request. Please call 1-800-258-9700 for assistance.

Wood

MAPLE TOPS

The 1-3/4” thick Maple Tops are constructed of the finest hard maple, fully cured and kiln-dried. The tough butcher-block construction includes placing the laminations on edge and bonding into a single self-supporting solid panel. Front and rear of the maple top top have a ¼” radiused beveled edge.

The Maple Tops may be refinished by sanding. Tops are coated with a Durakryl 102 finish. This rugged acrylic is highly resistant to water, alcohol, detergents, and other solvents.

Note: Please state if end use is to be for food service or preparation.

To specify a Maple Top, please use the following code:

Color Order Code
Maple MP-01

Steel

STAINLESS STEEL TOPS

The Stainless Steel Tops are designed as an inverted pan-type top. They are backed with a 1-1/8″ plastic laminate core.  The core is fastened to the table frame with 1/4-20 metal inserts, and the steel pan is then placed directly over the core.  With this method, the usual drumming and noise of a straight metal top is minimized and in some cases, even eliminated.

The standard stainless material is type No. 304 polished finish*.

To specify a Stainless Steel Top, please use the following code:

Color Order Code
Stainless Type 304 SS-01

 

*Type No. 316, No. 2B finish acid resistant stainless is available by special order. Please call 1-800-258-9700 for assistance.


COLD-ROLLED STEEL TOPS

The Cold-Rolled Steel Tops are designed as an inverted pan top.  They are backed with a 1-1/8″ fiberboard.  The core is fastened to the table frame with 1/4-20 metal inserts; the cold-rolled steel top is then placed directly over the core.

The Cold-Rolled Steel Tops are powder-coated to match the color of the workstation unless specified otherwise.

To specify a Cold-Rolled Steel Top, please use the following code:

Color Order Code
Same as workstation CS-01

Workplace Modular Systems metal products feature a highly durable, environmentally friendly powder-coat finish.

STANDARD COLORS

WHITE | Color Code: 0006
OYSTER | Color Code: 0150
SILVER GRAY (Semi-Metallic) | Color Code: 0002
TAN | Color Code: 0001
CHATEAU BLUE| Color Code: 0015
MERCURY BLUE | Color Code: 0100
NAVY BLUE | Color Code: 0900
BURGUNDY | Color Code: 0950
BLACK WRINKLE (Textured Finish) | Color Code: 0400
BLACK (Semi-Gloss) | Color Code: 0018

ADDITIONAL COLORS
Many other premium colors are available. Please contact Workplace Modular Systems for additional color selections.

COLOR-MATCHING
Color-matching is also available, subject to additional charge and extended lead time for color-match process.

IMPORTANT!
Actual product color may vary significantly from colors shown above due to color calibration and resolution of viewer monitors. For best color accuracy, please call Workplace at 1-800-258-9700 to request sample metal color chips.

ship

Quick Ship

Quick-Ship does not mean “what we have on hand.” You still get all the advantages of Workplace configured to order workstations. Only faster.

More Info

Call Us

Contact a Workplace Modular Systems Design Specialist for friendly assistance with workstation configuration, information, quotes, and support.

Connect

Mobile

Going Mobile

Need extra workspace? Simply move the workstation to wherever you need it, whenever you need it.

Our Mobile Models