Shelving

Workplace features the industry’s broadest range of shelving options:

Nine types of adjustable over-table shelving
Two types of fixed-height shelving.
Three styles of under-table shelving.

Click tiles to view shelving details.

ADJUSTABLE SHELVING
A wide variety of adjustable shelf
styles is available, including sloped,
cantilever, solid, and with dividers.

DUAL-SIDED SHELVING
Use dual-sided shelving in
back-to-back workstation
configurations.

STRUCTURAL RISER
This attractive design has open left
and right tubular channel design
with 200 pound weight capacity.

PANEL RISER
Enclosed inner panels create a
finished appearance. Add conven-
ient integrated electrical outlets.

Flip-Up Cabinet Storage
Mounts on Solid Uprights above
the worksurface. Available in all
ten standard colors.

UNDERTABLE SHELVING
Choose among several shelf depths,
pull-out tray or mobile tray.

UNDERTABLE TRAYS
Available as a pull-out shelf or
caster-mounted shelf provides easy
access to heavy equipment.

Adjustable OverTable Shelving

All Adjustable Shelving units are mounted above the worksurface and require Solid Uprights (sold separately) for mounting.

SOLID UPRIGHTS FOR MOUNTING

All shelving units feature:

All-metal construction; flanged 2″ on all sides, except Low Profile shelving.
Shelves are pre-punched to accept optional standard and large Back & End Stops.
Shelves are available with or without 20-amp duplex outlets or 15-amp duplex outlets.
Shelving is pre-punched to accept Light Fixtures.
Shelves are available in 12″, 15″, and 18″ depths. (Solid and wire divider shelving available in 12″ and 18″ depths only.)
Shelf lengths may be specified to fit full and half table lengths.*
Shelf position is adjustable in 1 1/2″ increments on Solid Uprights (except Low Profile shelving).

*All Shelving specified as half width will require addition of a Center Mount Upright.

Standard Shelving

Standard Shelving height 2” and adjusts in 1-1/2” increments.
125 pound weight capacity.
Standard shelving is available in 12”, 15” or 18” depths and fits table lengths between 24”L and 96”L (Half-length shelf requires a Center Mount Upright).
Standard shelving may be specified with electrical outlets (consult with Design Specialist).

NOTE: Standard shelving may be used as an Undertable Shelf. Please specify how Shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.

SOLID UPRIGHTS for Mounting

Low Profile Shelving

Low Profile Shelving height 1.25” and adjusts in 3” increments.
75 pound weight capacity.
Available in 12”, 15” or 18” depths and fit table lengths between 24” and 96”L.

SOLID UPRIGHTS for Mounting

Back & End Stops

All-metal Backstop and tapered End Stops offer all-around protection for Adjustable Shelves, Panel Risers, or worksurfaces.
Overall height of back and end stops is 5″ before mounting. Deduct thickness of shelf or worksurface to determine overall height.
Please advise how Backstop & End Stops are to be used so that appropriate brackets or mounting hardware is recommended and supplied.
Available in Standard and/or Large sizes.
Front Stops used for tilted or cantilevered shelving are also available. Consult a Design Specialist for further information.

Solid Divider Shelving

Metal shelf with easy to move all-metal snap-in dividers that may be spaced at desired locations along length of shelf in 1-1/2″ increments.
Top front of dividers and supplied end stops feature radius corners for appearance and safety.
125 pound capacity.
Shelf available in 12″ or 18″ depth. Fits table lengths between 24″ and 96″.

SOLID UPRIGHTS for Mounting

Wire Divider Shelving

An efficient, practical way to keep larger items organized and in check. Perfect for storage of shipping cartons and materials.
Perforated metal shelves feature divider spacing in approximately 3″ increments. Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
125 pound capacity.
Available in 12″ and 18″ depths. Fits table lengths between 24″ and 96″.
Shelf may be set at a 20° slope. A front stop—available in a variety of sizes—required.

NOTE: The Wire Divider shelf may be used as an under table shelf. Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.

SOLID UPRIGHTS for Mounting

Sloped Shelving

The Standard Shelf may be set at a 20-degree slope with shelf brackets
Front Stop is required and is available in a variety of sizes. Consult a Design Specialist for further information.
Sloped Shelving mounts to Solid Uprights.

SOLID UPRIGHTS for Mounting

Cantilever Shelving

22″ deep shelf of all-metal construction; flanged 2″ on all sides.
Shelf mounts between Solid Uprights and extends 10″ beyond back and front of uprights.
May be positioned for use as a flat surface, or at an angle up to 20 degrees at either front or back.
Front/Rear Stop with 2″ lip is included.

SOLID UPRIGHTS for Mounting

Wire Shelving

Open design of Metro Chrome industrial wire shelving minimizes dust accumulation and allows free circuation of air, as well as greater visibility of object on shelf.
Mounts to Solid Uprights with shelf brackets.
75 pound weight capacity.
Available in 48″, 60″ and 72″ lengths.

SOLID UPRIGHTS for Mounting

Non-Metal Worksurface Shelving

Attractive, easily cleaned surface mounts to Solid Uprights with wide flange Shelf Brackets.
Shelves adjust in 1.5″ increments on solid uprights.
Available in 12″ or 18″ depth. Fits table lengths between 24″ and 96″.
75 pound weight capacity.
Shelf material is available in:
- Phenolic resin
- Plastic laminate
- Maple

SOLID UPRIGHTS for Mounting

Dual-Sided Shelving

Adjustable shelving is accessible from both sides of back-to-back units or island.
Shelves available in painted steel, plastic laminate, ESD, or phenolic resin materials.
Shelves are 1” thick and adjust in 3” increments; 125 pound weight capacity per shelf.
Structural Uprights are available in 12″ or 18″ depth X 36″, 48″, or 60″ height. Fits table lengths between 24″ and 96″. (Additional center support is recommended on units exceeding 80″.
Electric power, air, articulating arms, lighting, and back/end stops may be added. Contact a Design Specialist for more information.

Fixed-Height Shelving

Fixed Height Shelving features:

All-metal construction.
Shelves are available in 12″ and 18″ depths.
Powerstrips with 20-amp or 15-amp capacity may be added.
Shelving is pre-punched to accept Light Fixtures.

All Fixed Height Shelving units are mounted on the worksurface.

Call your Design Specialist for more details on any shelving unit.

Structural Riser

The Structural Riser is constructed of a right and left side open risers in a tubular and formed channel design; connected with a swaybrace and 1” metal shelf. The open structure allows access from all sides.
Shelves available in painted steel, plastic laminate, ESD or phenolic resin materials.
Non-metal shelving may be specified in place of standard metal shelf. Back & end stops, air-trough, power and lighting may be added
200 pound weight capacity.
Structural Riser uprights are available in 12” or 18” depth x 12”, 18” or 24” height. Fits table lengths between 24” to 96”.

Panel Riser

Equipped with enclosed inner panels to create a more finished appearance. An optional rear panel is available.
20-amp duplex outlets may be specified in front shelf and riser.
125 pound weight capacity.
Available in 12” and 18” depths x 12”, 18”, or 24” heights.
Clearance beneath shelf is 2” less than overall height of assembly.
Back and end stops, Powerstrip and lighting may be added.

Special sizes available upon request. Full rear Safety/Privacy Shield also available.

Overhead Storage

The Overhead Storage Compartment provides internal storage up to 75 pounds in three available sizes:

48″L X 12.25″D X 12.5″H (P/N 7900-04)
60″L X 12.25″D X 12.5″H (P/N 7900-05)
36″L X 12.25″D X 12.5″H (P/N 7900-06-50) 1/2 of 72L

Unit mounts to solid uprights. Optional lockable door and undermount light is available.

SOLID UPRIGHTS for Mounting

Under Table Shelving

All metal construction, flanged 2″ on all four sides.
Under table shelves available in standard, extended, or full depth.
May be equipped with metal or wire dividers.
Pull-Out Tray.
Mobile Tray.

Standard Depth Under Table Shelving

Metal shelf mounts on leg crossbars with supplied brackets.
Shelves available in 12″ and 18″ depths.
Fits table lengths between 24″ and 96″.
Optional Back & End or Front End Stops may be specified.

Extended Depth Under Table Shelving

Metal shelf mounts on leg crossbars with supplied brackets.
Shelf depth is determined by leg-to-leg distance:
- Approx. 19″ depth on 24″ table
- Approx. 25″ depth on 30″ table
- Approx. 31″ depth on 36″ table.
Fits table lengths between 24″ and 96″.
Optional Back & End or Front End Stops may be specified.

Full Depth Under Table Shelving

Maximize storage with a shelf that is the same depth as leg-to-leg measurement.
Reinforced metal shelf mounts to the table leg’s structural frame
Available in 24″, 30″ and 36″ depths.
Fits table lengths between 24″ and 96″.

Pull Out Tray: Leg Mounted

Allows easier reach and access to stored equipment, parts, or peripherals.
Heavy-gauge metal construction with integrated tray pull.
Load capacity 200 lbs. evenly dispersed.
Available for 24”, 30” and 36” table depths; table lengths: 36″, 48″, 60″, or 72″.
Note: Leg Sections with provisions to attach shelf are required for mounting.
Compatible with Standard Workstation only.

Mobile Tray

Provides greater workstation flexibility.
Easy access to equipment and peripherals.
Welded, heavy-gauge metal, 500 lb. load capacity.
Includes 2 chrome pull handles.
Available for standard bench lengths between 36” and 96”
and depths of 24”, 30”, or 36”.
Accepts all standard Workplace Casters. Tray lengths 72” and greater require 6 Casters.

Wire Divider Shelving

An efficient, practical way to keep larger items organized and in check. Perfect for storage of shipping cartons and materials.
Metal shelf mounts on leg crossbars with supplied brackets.
Perforated shelves feature divider spacing in 3″ increments. Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
Available in 12″ and 18″ depths.
Fits table lengths between 24″ and 96″.