1-800-258-9700

Shelving

Workplace features the industry’s broadest range of shelving options:

  • Eight types of adjustable over-table shelving
  • Two types of fixed-height shelving.
  • Three styles of under-table shelving.
Click tiles to view shelving details.
ADJUSTABLE SHELVING
A wide variety of adjustable shelf
styles is available, including sloped,
cantilever, solid, and wire divider.
FIXED HEIGHT SHELVING
Panel Risers, Structural Risers,
and Overhead Storage.
UNDERTABLE SHELVING
Choose among several shelf widths,
pull-out tray or mobile tray.

Adjustable OverTable Shelving

All Adjustable Shelving units are mounted over the table top require Solid Uprights (sold separately)

SOLID UPRIGHTS FOR MOUNTING

All shelving units feature:

  • All-metal construction; flanged 2″ on all sides.
  • Shelves are prepunched to accept optional Back & End Stops.
  • Shelves are available with or without 20-amp duplex outlets or 15-amp duplex outlets.
  • Shelving is pre-punched to accept Light Fixtures.
  • Shelves are available in 12″ and 18″ depths.
  • Shelf lengths may be specified to fit full and half table lengths.*
  • Shelf position is adjustable in 1 1/2″ increments on Solid Uprights.

*All Shelving specified as half width will require addition of a Center Mount Upright.

Standard Shelving

  • Standard shelving is available in 12″ or 18″ depths and fit table lengths between 24″ and 96″.
  • Standard Shelving mounts to Solid Uprights and adjustable in 1.5″ increments.
  • 75 pound weight capacity.

NOTE: Standard shelving may be used as an Undertable Shelf. Please specify how Shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.

Back & End Stops

  • All-metal Backstop and tapered End Stops offer all-around protection for Shelves, Risers, or Worksurfaces.
  • Please advise how Backstop & End Stops are to be used so that appropriate brackets or mounting hardware is recommended and supplied.
  • Overall height of back and end stops is 5″ before mounting; deduct thickness of worksurface (or 2″ if mounted to shelf) to determine overall height.
  • Front Stops are also available. Consult a Design Specialist for further information.

Sloped Shelving

  • The Standard Shelf may be set at a 20-degree slope with shelf brackets
  • Front Stop is required and is available in a variety of sizes. Consult a Design Specialist for further information.
  • Sloped Shelving mounts to Solid Uprights .

Cantilever Shelving

  • 22″ deep shelf of all-metal construction; flanged 2″ on all sides.
  • Shelf mounts between Solid Uprights and extends 10″ beyond back and front of uprights.
  • May be positioned for use as a flat surface, or at an angle up to 20 degrees at either front or back.
  • Front/Rear Stop with 2″ lip is included.

Solid Divider Shelving

  • Metal shelf with easy to move all-metal snap-in dividers that may be spaced at desired locations along length of shelf in 1-1/2″ increments.
  • Top front of dividers and supplied end stops feature radius corners for appearance and safety.
  • 75 pound capacity.
  • Shelf available in 12″ or 18″ depth. Fits table lengths between 24″ and 96″.

Wire Divider Shelving

  • Efficient, practical way to keep larger items organized and in check.  Perfect for storage of shipping cartons and materials.
  • Perforated shelves feature divider spacing in approximately 3″ increments.  Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
  • Available in 12″ and 18″ depths. Fits table lengths between 24″ and 96″.
  • Shelf may be set at a 20° slope.

NOTE: The Wire Divider shelf may be used as an under table shelf.  Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.

Non-Metal Worksurface Shelving

  • Attractive, easily cleaned surface mounts to Solid Uprights with wide flange Shelf Brackets.
  • Shelves adjust in 1.5″ increments on solid uprights.
  • Available in 12″ or 18″ depth. Fits table lengths between 24″ and 96″.
  • 75 pound weight capacity.
  • Shelf material is available in:
    • Phenolic resin
    • Plastic laminate
    • ESD laminate
    • Maple

Wire Shelving

  • Open design of Metro Chrome industrial wire shelving minimizes dust accumulation and allows free circuation of air, as well as greater visibility of object on shelf.
  • Mounts to Solid Uprights with shelf brackets.
  • 75 pound weight capacity.
  • Available in 48″, 60″ and 72″ lengths.

ESD Shelving

Shelving with ESD laminate is designed for electronics manufacturing environments,  as well as hospitals, medical facilities, and clean rooms as they provide a surface that will not attract dust or dirt particles.

  • Low electrical resistance. Surface to ground less than 1 x 109 ohms.
  • Absolute charge drainage and zero voltage suppression: dissipates a 5,000 volt static charge to zero in less than 0.01 second per FTM-101C at 5 to 95 percent relative humidity.
  • Resistant to most common solvents, hot solder and fluxes.

Dual-Sided Shelving

  • Adjustable shelving is accessible from both sides of back-to-back units or island.
  • Shelves available in painted steel, plastic laminate, ESD, or phenolic resin materials.
  • Shelves are 1″ thick and adjust in 3″ increments.
  • Structural Uprights are available in 12″ or 18″ depth X 36″, 48″, or 60″ height. Fits table lengths between 24″ and 96″. (Additional center support is recommended on units exceeding 80″.
  • Electric power, air, articulating arms, lighting, and back/end stops may be added. Contact a Design Specialist for more information.

Articulating Tray

  • Keeps tools, parts, and equipment off the worksurface, yet within easy reach.
  • Tray is 18″L x 12″D with 1″ flange around all sides of worksurface and includes a foam pad insert.

Fixed-Height Shelving

Fixed Height Shelving features:

  • All-metal construction.
  • Shelves are available in 12″ and 18″ depths.
  • Powerstrips with 20-amp or 15-amp capacity may be added.
  • Shelving is pre-punched to accept Light Fixtures.

All Fixed Height Shelving units are mounted on the worksurface.

Call your Design Specialist for more details on any shelving unit.

Structural Riser

  • The Structural Riser is constructed of a right and left side open risers in a tubular and formed channel design; connected with a swaybrace and 1” metal shelf. The open structure allows access from all sides.
  • Non-metal shelving may be specified in place of standard metal shelf. Back & end stops, air-trough, power and lighting may be added
  • 200 pound weight capacity.
  • Structural Riser uprights are available in 12” or 18” depth x 12”, 18” or 24” height. Fits table lengths between 24” to 96”.

Panel Riser

  • Equipped with enclosed inner panels to create a more finished appearance.
  • Back and end stops, power, and lighting may be added.
  • Panels may be specified with 20-amp duplex outlets in front shelf and riser.
  • 125 pound weight capacity.
  • Available in 12″ and 18″ depths x 12″, 18″, or 24″ heights.
  • Clearance beneath shelf is 2″ less than overall height of assembly.

Special sizes available upon request. Full rear Safety/Privacy Shield also available.

Overhead Storage

The Overhead Storage Compartment provides internal storage up to 75 pounds in three available sizes:

  • 48″L X 12.25″D X 12.5″H (P/N 7900-04)
  • 60″L X 12.25″D X 12.5″H (P/N 7900-05)
  • 36″L X 12.25″D X 12.5″H (P/N 7900-06-50)  1/2 of 72L

Unit mounts to solid uprights and has lockable door. Optional under mount light is available.

Under Table Shelving

  • All metal construction, flanged 2″ on all four sides.
  • Under table shelves available in standard, extended, or full depth.
  • May be equipped with metal or wire dividers.

Standard Depth Under Table Shelving

  • Metal shelf mounts on leg crossbars with supplied brackets.
  • Shelves available in 12″ and 18″ depths.
  • Fits table lengths between 24″ and 96″.
  • Optional Back & End Stops may be specified.

Extended Depth Under Table Shelving

  • Metal shelf mounts on leg crossbars with supplied brackets.
  • Shelf depth is determined by leg-to-leg distance:
    • Approx. 19″ depth on 24″ table
    • Approx. 25″ depth on 30″ table
    • Approx. 31″ depth on 36″ table.
  • Fits table lengths between 24″ and 96″.
  • Optional Back & End Stops may be specified.

Full Depth Under Table Shelving

  • Maximize storage with a shelf that is the same depth as leg-to-leg measurement.
  • Reinforced metal shelf mounts to the table’s structural frame
  • Available in 24″, 30″ and 36″ depths.
  • Fits table lengths between 24″ and 96″.

Pull Out Tray: Leg Mounted

  • Allows easier reach and access to stored equipment, parts, or peripherals.
  • Heavy-gauge metal construction with integrated tray pull.
  • Load capacity 200 lbs. evenly dispersed.
  • Available for 24”, 30” and 36” table depths; table lengths: 36″, 48″, 60″, or 72″.
  • Note: Leg Sections with provisions to attach shelf are required for mounting.
  • Compatible with Standard Workstation only.

Mobile Tray

  • Provides greater workstation flexibility.
  • Easy access to equipment and peripherals.
  • Welded, heavy-gauge metal, 500 lb. load capacity.
  • Includes 2 chrome pull handles.
  • Available for standard bench lengths between 36” and 96”
    and depths of 24”, 30”, or 36”.
  • Accepts all standard Workplace Casters.
    Tray lengths 72” and greater require 6 Casters.

Wire Divider Shelving

  • An efficient, practical way to keep larger items organized and in check.  Perfect for storage of shipping cartons and materials.
  • Metal shelf mounts on leg crossbars with supplied brackets.
  • Perforated shelves feature divider spacing in 3″ increments. Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
  • Available in 12″ and 18″ depths.
  • Fits table lengths between 24″ and 96″.

How to Order

It’s the human touch that matters. That’s why you’ll want to connect with one of our Design Specialists Monday through Friday, 8 a.m. to 5 p.m. Eastern Time.

Connect