Workplace features the industry’s broaadest range of shelving options:

  • Two types of fixed height shelving.
  • Eight types of adjustable over table shelving
  • Three styles of under table shelving.

Click tiles for specific information.

Fixed-Height Shelving

All Fixed-Height Shelving units are mounted on the worksurface and are available with open or enclosed panels.

  • All-metal construction.
  • Shelves are available in 12″ and 18″ depths.
  • Powerstrips with 15-amp or 20-amp capacity may be added to shelves.
  • Shelving is pre-punched to accept Light Fixtures.

Click tabs to view Fixed-Height shelving options

Structural Riser

  • The Structural Riser is constructed of a right and left side open risers in a tubular and formed channel design; connected with a swaybrace and 1” metal shelf. The open structure allows access from all sides.
  • Non-metal shelving may be specified in place of standard metal shelf. Back & end stops, air-trough, power and lighting may be added

  • 200 pound weight capacity.
  • Structural Riser uprights are available in 12” or 18” depth x 12”, 18” or 24” height. Fits table lengths between 24” to 96”.

Panel Riser

  • Equipped with enclosed inner panels to create a more finished appearance.
  • Back and end stops, power, and lighting may be added.
  • Panels may be specified with 20-amp duplex outlets in front shelf and riser.
  • 125 pound weight capacity.
  • Available in 12″ and 18″ depths x 12″, 18″, or 24″ heights.
  • Clearance beneath shelf is 2″ less than overall height of assembly.

Special sizes available upon request. Full rear Safety/Privacy Shield also available.

Adjustable Over Table Shelving

All Adjustable Shelving units are mounted over the table top require Solid Uprights (sold separately)

SOLID UPRIGHTS FOR MOUNTING

All shelving options feature:

  • All-metal construction; flanged 2″ on all sides.
  • Shelves are prepunched to accept optional Back & End Stops.
  • Shelves are available with or without 20-amp duplex outlets or 15-amp duplex outlets.
  • Shelving is pre-punched to accept Light Fixtures.
  • Shelves are available in 12″ and 18″ depths.
  • Shelf lengths may be specified to fit full and half table lengths.*
  • Shelf position is adjustable in 1 1/2″ increments on Solid Uprights.
*All Shelving specified as half width will require addition of a Center Mount Upright.

Click tabs to view individual overtable shelving option details

Standard Shelving

  • Standard shelving is available in 12″ or 18″ depths and fit table lengths between 24″ and 96″.
  • Standard Shelving mounts to Solid Uprights and adjustable in 1.5″ increments.
  • 75 pound weight capacity.

NOTE: Standard shelving may be used as an Undertable Shelf. Please specify how Shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.

Back & End Stops

  • All-metal Backstop and tapered End Stops offer all-around protection for Shelves, Risers, or Worksurfaces.
  • Please advise how Backstop & End Stops are to be used so that appropriate brackets or mounting hardware is recommended and supplied.
  • Overall height of back and end stops is 5″ before mounting; deduct thickness of worksurface (or 2″ if mounted to shelf) to determine overall height.
  • Front Stops are also available. Consult a Design Specialist for further information.

Sloped Shelving

  • The Standard Shelf may be set at a 20-degree slope with shelf brackets
  • Front Stop is required and is available in a variety of sizes. Consult a Design Specialist for further information.
  • Sloped Shelving mounts to Solid Uprights .

Cantilever Shelving

  • 22″ deep shelf of all-metal construction; flanged 2″ on all sides.
  • Shelf mounts between Solid Uprights and extends 10″ beyond back and front of uprights.
  • May be positioned for use as a flat surface, or at an angle up to 20 degrees at either front or back.
  • Front/Rear Stop with 2″ lip is included.

Solid Divider Shelving

  • Metal shelf with easy to move all-metal snap-in dividers that may be spaced at desired locations along length of shelf in 1-1/2″ increments.
  • Top front of dividers and supplied end stops feature radius corners for appearance and safety.
  • 75 pound capacity.
  • Shelf available in 12″ or 18″ depth. Fits table lengths between 24″ and 96″.

Wire Divider Shelving

  • Efficient, practical way to keep larger items organized and in check.  Perfect for storage of shipping cartons and materials.
  • Perforated shelves feature divider spacing in approximately 3″ increments.  Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
  • Available in 12″ and 18″ depths. Fits table lengths between 24″ and 96″.
  • Shelf may be set at a 20° slope.

NOTE: The Wire Divider shelf may be used as an under table shelf.  Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.

Non-Metal Shelving

  • Attractive, easily cleaned surface mounts to Solid Uprights with included Shelf Brackets.
  • Shelves adjust in 1.5″ increments on solid uprights.
  • Available in 12″ or 18″ depth. Fits table lengths between 24″ and 96″.
  • 75 pound weight capacity.
  • Shelf material is available in:
    • Plastic laminate
    • ESD laminate
    • Maple
    • Phenolic resin

Wire Shelving

  • Open design of Metro Chrome industrial wire shelving minimizes dust accumulation and allows free circuation of air, as well as greater visibility of object on shelf.
  • Mounts to Solid Uprights with shelf brackets.
  • 75 pound weight capacity.
  • Available in 48″, 60″ and 72″ lengths.

Dual-Sided Shelving

  • Adjustable shelving is accessible from both sides of back-to-back units or island.
  • Shelves available in painted steel, plastic laminate, ESD, or phenolic resin materials.
  • Shelves are 1″ thick and adjust in 3″ increments.
  • Structural Uprights are available in 12″ or 18″ depth X 36″, 48″, or 60″ height. Fits table lengths between 24″ and 96″. (Additional center support is recommended on units exceeding 80″.
  • Electric power, air, articulating arms, lighting, and back/end stops may be added. Contact a Design Specialist for more information.

Under Table Shelving

  • All metal construction, flanged 2″ on all four sides.
  • Under table shelves available in standard, extended, or full depth.
  • May be equipped with metal or wire dividers.

Click tabs to view Under Table Shelving options.

Standard Depth Under Table Shelving

  • Metal shelf mounts on leg crossbars with supplied brackets.
  • Shelves available in 12″ and 18″ depths.
  • Fits table lengths between 24″ and 96″.
  • Optional Back & End Stops may be specified.

Extended Depth Under Table Shelving

  • Metal shelf mounts on leg crossbars with supplied brackets.
  • Shelf depth is determined by leg-to-leg distance:
    • Approx. 19″ depth on 24″ table
    • Approx. 25″ depth on 30″ table
    • Approx. 31″ depth on 36″ table.
  • Fits table lengths between 24″ and 96″.
  • Optional Back & End Stops may be specified.

Full Depth Under Table Shelving

  • Maximize storage with a shelf that is the same depth as leg-to-leg measurement.
  • Reinforced metal shelf mounts to the table’s structural frame
  • Available in 24″, 30″ and 36″ depths.
  • Fits table lengths between 24″ and 96″.

Wire Divider Shelving

  • An efficient, practical way to keep larger items organized and in check.  Perfect for storage of shipping cartons and materials.
  • Metal shelf mounts on leg crossbars with supplied brackets.
  • Perforated shelves feature divider spacing in 3″ increments.  Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
  • Available in 12″ and 18″ depths.
  • Fits table lengths between 24″ and 96″.

How to Order

It’s the human touch that matters. That’s why you’ll want to connect with one of our Design Specialists Monday through Friday, 8 a.m. to 5 p.m. Eastern Time.

Connect