All Overtable shelving units are mounted to Solid Uprights (sold separately) except for the Fixed Riser Shelf.
All shelving options feature:
- All-metal construction; flanged 2″ on all sides.
- Shelves are prepunched to accept optional Back & End Stops.
- Shelves are available with or without 20-amp duplex outlets or 15-amp duplex outlets.
- Shelving is pre-punched to accept Light Fixtures.
- Shelves are available in 12″ and 18″ depths.
- Shelf lengths may be specified to fit full and half table lengths.*
- Shelf position is adjustable in 1 1/2″ increments on Solid Uprights.
*All Shelving specified as half width will require addition of a Center Mount Upright.
Call your Design Specialist for more details on any shelving unit.
Click tabs to view individual shelving option details
- Standard shelving is available in full and half-widths. Call your Design Specialist for specific width availability.
- Standard shelving may be used as an Undertable Shelf (mounted to lower crossbars of open style Leg Sections). Please specify how Shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.
- When used as an overtable shelf it may be set at a 20-degree slope with the use of specific shelf brackets and optional front stop. Please call for more information.
- Equipped with enclosed inner panels to create a more finished appearance.
- Available in 12″ and 18″ depths x 12″, 18″, or 24″ heights.
- May be specified with 20-amp duplex outlets in front of Shelf and Risers, as shown.
- Also available with vertical riser cutouts to accept installation of optional Powertrough.
- Clearance under Fixed Riser Shelf is 2″ less than overall height of assembly.
Special sizes available upon request. Please ask about Insulator Kit for use with conductive worksurface. Full rear Safety/Privacy Shield also available.
- Easy to move all-metal snap-in dividers may be spaced at desired locations along length of shelf in 1-1/2″ increments.
- Top front of Dividers and supplied end stops feature radius corners for appearance and safety.
- Shelf available in full and half table lengths.
- Mounts to Solid Uprights using Shelf Brackets (both sold separately).
- The Solid Divider shelf may be used under the table as shown on left. Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.
- Efficient, practical way to keep larger items organized and in check. Perfect for storage of shipping cartons and materials.
- Perforated shelves feature divider spacing in approximately 3″ increments. Threaded metal (plated) dividers fasten securely with nuts on underside of shelf.
- Available in 12″ and 18″ depths.
- Shelf may also be set at a 20° slope.
- Shelf system mounts to Solid Uprights with Shelf Brackets (both sold separately).
- The Wire Divider shelf may be used under the table surface as shown on left. Please specify how shelf will be used so that we may recommend and supply the correct mounting brackets and/or hardware.
- Deep style shelf of all-metal construction; flanged 2″ on all sides.
- Shelf mounts on Solid Uprights (sold separately); fits between Uprights, and extends 10″ beyond back and front of uprights.
- Shelf may be positioned for use as a flat surface, or at an angle of up to 20 degrees at either front or back.
The Overhead Storage Compartment provides internal storage up to 75 pounds in three available sizes:
- 48″L X 12.25″D X 12.5″H (P/N 7900-04)
- 60″L X 12.25″D X 12.5″H (P/N 7900-05)
- 36″L X 12.25″D X 12.5″H (P/N 7900-06-50) 1/2 of 72L
Unit mounts to solid uprights and has lockable door. Optional under mount light is available.
Back & End Stops
- All-metal Backstop and tapered End Stops offer all-around protection for Tops, Risers, or Shelves.
- Please advise how Backstop & End Stops are to be used so that appropriate brackets or mounting hardware is recommended and supplied.
- Front Stops available. Consult Design Specialist for further information.
- Note: Overall height of back/end stops is 5″ before mounting; deduct thickness of worksurface (or 2″ if mounted to shelf) to determine overall height.
- Note: Back and End Stops are Sold separately.
- Tilt Bracket may be used for under-shelf lighting applications, including sloped shelves.
- Keeps tools, parts, and equipment off the worksurface, yet within easy reach.
- Tray is 18″L x 12″D with 1″ flange around all sides of worksurface and includes a foam pad insert.